No subject

> I'm trying to add better support to libpri for maintenance
> protocol SERVice and SERVice ACKnowledgement messages.  The
> code is marked in q931.c as being a 'KLUDGE' and should be
> ripe by now for fixing.
>-
> Things work great on my test machine with a T400 and a loop
> back cable.  B-Channels are able to go in and out of
> service, and the state is stored in chan_zap.c so that
> channels out of service are immediately skipped when
> attempting a call on them (similar to Do Not Disturb.)
>-
> Problem is, I can't get it to work in the real world.  And
> given that this is a non-ITU message type, I'm not sure if
> it's me or the switch that doesn't want to play nice.  As
> best I can tell, these SERVice messages are defined in ANSI
> T1.607 with a list price of $360 -- no 3 freebie downloads
> like the ITU specs.  Thus, I've scoured various other web
> resources to cobble together the implementation.
>-
> If I'm correct in my assumptions so far, these NFAS/CCS
> SERVice messages are required for proper operation of backup
> D-Channels, in addition to maintenance of B-Channels.
> Currently, it appears although * supports the use of a
> backup D-Channel, it is not able to initiate a backup
> procedure -- only follow what the far-end switch does.
>-
> I'm attaching a patch of what I have so far, but what I
> could really, really use from some kind soul is a PRI trace
> of a proper SERV exchange for maintenance on a B-Channel.
> If you want to try the patch, it adds CLI commands:
> "zap service enable|disable|loop channel <chan num>"
> (Very similar to the Cisco IOS Dial Technologies command:
> "isdn service <chan num> state 0|1|2")

======================================================================
Relationships       ID      Summary
----------------------------------------------------------------------
related to          0007963 NFAS primary D-channel always being mak...
====================================================================== 

---------------------------------------------------------------------- 
 mattf - 10-20-07 14:43  
---------------------------------------------------------------------- 
Cmaj, I know that you have been working on this for a long time.  I was
hesitant to add it until it was tested, but going back in the comments it
looks like you have had some success with this.  Would you like to have
this feature merged in?  If so, you'll need to make sure the patch merges
cleanly and functions with trunk libpri (svn co
http://svn.digium.com/svn/libpri/trunk), then give me an `svn diff` for the
diff.  I will start reviewing it for inclusion then. 

Issue History 
Date Modified   Username       Field                    Change               
====================================================================== 
10-20-07 14:43  mattf          Note Added: 0072317                          
======================================================================