[asterisk-bugs] [AsteriskNOW 0010344]: Dialing out with multiple extensions registered to Cisco 7960

[noreply at bugs.digium.com]

The following issue has been RESOLVED. 
====================================================================== 
http://bugs.digium.com/view.php?id=10344 
====================================================================== 
Reported By:                dwebb
Assigned To:                james
====================================================================== 
Project:                    AsteriskNOW
Issue ID:                   10344
Category:                   General
Reproducibility:            always
Severity:                   minor
Priority:                   normal
Status:                     resolved
Resolution:                 duplicate
Duplicate:                  9044
Fixed in Version:           
====================================================================== 
Date Submitted:             07-31-2007 12:11 CDT
Last Modified:              07-31-2007 15:19 CDT
====================================================================== 
Summary:                    Dialing out with multiple extensions registered to
Cisco 7960
Description: 
I have a Cisco 7960 with 6 lines.  I want to regsiter 1 extension (6001) to
lines 1 thru 5 and 1 extension (6050) to line 6.

The phone accepts incoming calls correctly on the proper lines, but when
trying to place outgoing calls on lines 1-5 (Ext 6001) I get the following
messages in the sip debug output.

<------------->
--- (19 headers 13 lines) ---
Sending to 192.168.1.169 : 5060 (NAT)
Using INVITE request as basis request -
00062825-dd52000c-548a395f-316b226a at 192.168.1.169
Found peer '6050'
[Jul 31 11:12:50] WARNING[5209]: chan_sip.c:8190 check_auth: username
mismatch, have <6050>, digest has <6001>
[Jul 31 11:12:50] NOTICE[5209]: chan_sip.c:13486 handle_request_invite:
Failed to authenticate user "David Webb"
<sip:6001 at 192.168.1.13>;tag=00062825dd5201a5070513b4-2da84749


I found a similar situation at this post:
http://forums.digium.com/viewtopic.php?=&p=43656

and I then added this line to my sip.conf file

insecure=port,invite

Once I did that, I am able to make outbound calls on the lines registered
to extension 6001, but when placed they use the extension 6050 settings
(like the caller ID displayed).

I need to make outband calls as 6001 (on lines 1-5) and outbound calls as
6050 (on line 6) and have the lines behave independently of one another. 
It looks now like the "insecure=port,invite" just fools the PBX into
letting me make a call as if I was extension 6050 from extension 6001.

Please help.  I am hoping this is just a setting on the PBX, but maybe a
bug.  Thank you!

======================================================================
Relationships       ID      Summary
----------------------------------------------------------------------
duplicate of        0009044 Sipura 2000 cannot authenticate when bo...
====================================================================== 

---------------------------------------------------------------------- 
 qwell - 07-31-07 15:19  
---------------------------------------------------------------------- 
Duplicate of 9044.  Closing. 

Issue History 
Date Modified   Username       Field                    Change               
====================================================================== 
07-31-07 15:19  qwell          Relationship added       duplicate of 0009044
07-31-07 15:19  qwell          Duplicate ID             0 => 9044           
07-31-07 15:19  qwell          Status                   assigned => resolved
07-31-07 15:19  qwell          Resolution               open => duplicate   
07-31-07 15:19  qwell          Note Added: 0068160                          
======================================================================