[asterisk-bugs] [Zaptel 0010314]: [patch] Merged in support for high resolution timers in kernel >=2.6.16

[noreply at bugs.digium.com]

A NOTE has been added to this issue. 
====================================================================== 
http://bugs.digium.com/view.php?id=10314 
====================================================================== 
Reported By:                darren1713
Assigned To:                
====================================================================== 
Project:                    Zaptel
Issue ID:                   10314
Category:                   ztdummy
Reproducibility:            always
Severity:                   feature
Priority:                   normal
Status:                     new
Zaptel Version:              SVN 
SVN Branch (only for SVN checkouts, not tarball releases): N/A  
SVN Revision (number only!): 2770 
Disclaimer on File?:        N/A 
Request Review:              
====================================================================== 
Date Submitted:             07-26-2007 18:36 CDT
Last Modified:              07-27-2007 15:50 CDT
====================================================================== 
Summary:                    [patch] Merged in support for high resolution timers
in kernel >=2.6.16
Description: 
The new high resolution timer in the kernel generates very accurate
periodic timing. Just using the kernel based timing gets these sorts of
results from ztdummy (99.999992% avg):

......
8192 samples in 8192.000000 sample intervals 100.000000%
8192 samples in 8192.008000 sample intervals 99.999908%
--- Results after 123 passes ---
Best: 100.000000 -- Worst: 99.999512 -- Average: 99.999992

The high resolution timer in ztdummy is only built if it's supported and
enabled in the kernel, and will continue to use the RTC timing if the high
resolution timers are not available. 

Specifically, CONFIG_HIGH_RES_TIMERS needs to be enabled (Processor type
and features -> High Resolution Timer Support), and optionally, (Processor
type and features -> HPET Timer Support) provides a better clock source.

There should be no side effects to this, since it's the new kernel
timers.

Adding an option into the "make menuselect" to force RTC instead if they
are both available would be a good addition. Configs/Makefiles are not my
fortay, so this would be better for someone else to do.

====================================================================== 

---------------------------------------------------------------------- 
 DEA - 07-27-07 15:50  
---------------------------------------------------------------------- 
Lightly tested here with no regressions noted.  My test server is an old
PIII, so I am stuck with PIT for a timer (not so good).

Even so I see marked improvement in zttest results, and more importantly
I was seeing a 4~8% load on the system from running the RTC, and that is
gone.

I cannot wait to test it on one of my newer, better equiped servers. 

Issue History 
Date Modified   Username       Field                    Change               
====================================================================== 
07-27-07 15:50  DEA            Note Added: 0067997                          
======================================================================