[Asterisk-bugs] [Asterisk 0010127]: Queue timeouts are considerably higher than expected

[noreply at bugs.digium.com]

A NOTE has been added to this issue. 
====================================================================== 
http://bugs.digium.com/view.php?id=10127 
====================================================================== 
Reported By:                bcnit
Assigned To:                
====================================================================== 
Project:                    Asterisk
Issue ID:                   10127
Category:                   Applications/app_queue
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     feedback
Asterisk Version:           1.4.6 
SVN Branch (only for SVN checkouts, not tarball releases): N/A  
SVN Revision (number only!):  
Disclaimer on File?:        Yes 
Request Review:              
====================================================================== 
Date Submitted:             07-05-2007 20:31 CDT
Last Modified:              07-18-2007 16:55 CDT
====================================================================== 
Summary:                    Queue timeouts are considerably higher than expected
Description: 
A queue is defined as follows:

----------------------------
[testq]
timeout=10
retry=5
strategy=ringall
wrapuptime=0
maxlen=0
joinempty=no
leavewhenempty=yes
eventmemberstatus=no
eventwhencalled=no
reportholdtime=no
memberdelay=0
weight=0
timeoutrestart=0
autopause=no
member => SIP/100
member => SIP/101
member => SIP/102
----------------------------

When called with 'Queue(testq,n)':
1 - The phones ring for 10 seconds.
2 - There is 5 seconds silence
3 - The phones ring for 10 seconds.
4 - There is 5 seconds silence
5 - The call exits the queue on the time-out cycle

So, despite the queue having a timeout of 10 seconds, the call is in the
queue for 30.

When called with 'Queue(testq,n,,,10):
1 - The phones ring for 10 seconds.
2 - There is 5 seconds silence
3 - The call exits the queue (no mention is made of the time-out cycle).

So, despite coding an explicit 10 seconds timeout, the call is in the
queue for 15.


====================================================================== 

---------------------------------------------------------------------- 
 blitzrage - 07-18-07 16:55  
---------------------------------------------------------------------- 
I tested the latest patch and it is very close to working.

On the first call, 2 of 3 members are rang, but where the third member
would be called, there is just a delay, then the Queue() exits and
continues on in the dialplan.

On the 2nd call, all 3 members are rang and the Queue() exits to the
dialplan (works as desired).

All calls beyond the first call seem to work fine, it's just the first
call that doesn't work right. If I restart Asterisk, then I can reproduce
as stated above. 

Issue History 
Date Modified   Username       Field                    Change               
====================================================================== 
07-18-07 16:55  blitzrage      Note Added: 0067557                          
======================================================================