[asterisk-bugs] [Asterisk 0010228]: Extension Status does not change to 8 durring ring
noreply at bugs.digium.com
noreply at bugs.digium.com
Mon Aug 6 14:14:42 CDT 2007
A NOTE has been added to this issue.
======================================================================
http://bugs.digium.com/view.php?id=10228
======================================================================
Reported By: swolfe
Assigned To:
======================================================================
Project: Asterisk
Issue ID: 10228
Category: Core/*
Reproducibility: always
Severity: minor
Priority: normal
Status: feedback
Asterisk Version: 1.4.8
SVN Branch (only for SVN checkouts, not tarball releases): N/A
SVN Revision (number only!):
Disclaimer on File?: No
Request Review:
======================================================================
Date Submitted: 07-18-2007 10:55 CDT
Last Modified: 08-06-2007 14:14 CDT
======================================================================
Summary: Extension Status does not change to 8 durring ring
Description:
When calling from an IAX extension to a SIP extension the API command:
Action: ExtensionState
Exten: 200
Gives a status of 0
********************************
Response: Success
Message: Extension Status
Exten: 200
Context: default
Hint: SIP/200
Status: 0
********************************
Where calling from SIP to IAX gives the correct Status
********************************
Response: Success
Message: Extension Status
Exten: 702
Context: default
Hint: IAX2/702
Status: 8
********************************
======================================================================
----------------------------------------------------------------------
swolfe - 08-06-07 14:14
----------------------------------------------------------------------
localhost*CLI> core show hints
localhost*CLI>
-= Registered Asterisk Dial Plan Hints =-
7000 at default : IAX2/7000
State:Idle Watchers 0
6000 at default : SIP/6000
State:Idle Watchers 0
351 at default : SIP/351
State:Unavailable Watchers 0
Here is SIP.CONF with all the comments taken out.
[general]
context=default ; Default context for incoming calls
allowoverlap=no ; Disable overlap dialing support.
(Default is yes)
bindport=5060 ; UDP Port to bind to (SIP standard port
is 5060)
bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0 binds to
all)
srvlookup=yes ; Enable DNS SRV lookups on outbound
calls
[351]
type=friend
;context = incomming_local
fullname = Spider Man
host = dynamic
mailbox = 351
secret = XXXX
vmsecret = XXXX
dtmfmode = rfc2833
canreinvite = yes
nat = no
qualify = yes
Issue History
Date Modified Username Field Change
======================================================================
08-06-07 14:14 swolfe Note Added: 0068510
======================================================================
More information about the asterisk-bugs
mailing list