[asterisk-bugs] [Asterisk 0010388]: TE120XP

[noreply at bugs.digium.com]

A NOTE has been added to this issue. 
====================================================================== 
http://bugs.digium.com/view.php?id=10388 
====================================================================== 
Reported By:                gaurav6628
Assigned To:                
====================================================================== 
Project:                    Asterisk
Issue ID:                   10388
Category:                   Channels/chan_zap
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     new
Asterisk Version:            1.2.23  
SVN Branch (only for SVN checkouts, not tarball releases): N/A  
SVN Revision (number only!):  
Disclaimer on File?:        N/A 
Request Review:              
====================================================================== 
Date Submitted:             08-06-2007 06:15 CDT
Last Modified:              08-06-2007 06:58 CDT
====================================================================== 
Summary:                    TE120XP
Description: 
Hi, 

We are in the process of installing TE120P card in E1 mode on IBMX3400 .

The problem which we are facing is we have configured only span 1 but when
we run ztcfg –vvvvv then the output which we are getting is :----

Zaptel Configuration
======================

SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: Clear channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: Clear channel (Default) (Slaves: 06)
Channel 07: Clear channel (Default) (Slaves: 07)
Channel 08: Clear channel (Default) (Slaves: 08)
Channel 09: Clear channel (Default) (Slaves: 09)
Channel 10: Clear channel (Default) (Slaves: 10)
Channel 11: Clear channel (Default) (Slaves: 11)
Channel 12: Clear channel (Default) (Slaves: 12)
Channel 13: Clear channel (Default) (Slaves: 13)
Channel 14: Clear channel (Default) (Slaves: 14)
Channel 15: Clear channel (Default) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: Clear channel (Default) (Slaves: 17)
Channel 18: Clear channel (Default) (Slaves: 18)
Channel 19: Clear channel (Default) (Slaves: 19)
Channel 20: Clear channel (Default) (Slaves: 20)
Channel 21: Clear channel (Default) (Slaves: 21)
Channel 22: Clear channel (Default) (Slaves: 22)
Channel 23: Clear channel (Default) (Slaves: 23)
Channel 24: Clear channel (Default) (Slaves: 24)
Channel 25: Clear channel (Default) (Slaves: 25)
Channel 26: Clear channel (Default) (Slaves: 26)
Channel 27: Clear channel (Default) (Slaves: 27)
Channel 28: Clear channel (Default) (Slaves: 28)
Channel 29: Clear channel (Default) (Slaves: 29)
Channel 30: Clear channel (Default) (Slaves: 30)
Channel 31: Clear channel (Default) (Slaves: 31)

31 channels configured.

CAS signalling on span 2 conflicts with HDLC with FCS check on channel
16.

Also asterisk is not running and getting killed because unable to load
chan_zap.so .

  == Parsing '/etc/asterisk/zapata.conf': Found
    -- Registered channel 1, PRI Signalling signalling
    -- Registered channel 2, PRI Signalling signalling
    -- Registered channel 3, PRI Signalling signalling
    -- Registered channel 4, PRI Signalling signalling
    -- Registered channel 5, PRI Signalling signalling
    -- Registered channel 6, PRI Signalling signalling
    -- Registered channel 7, PRI Signalling signalling
    -- Registered channel 8, PRI Signalling signalling
    -- Registered channel 9, PRI Signalling signalling
    -- Registered channel 10, PRI Signalling signalling
    -- Registered channel 11, PRI Signalling signalling
    -- Registered channel 12, PRI Signalling signalling
    -- Registered channel 13, PRI Signalling signalling
    -- Registered channel 14, PRI Signalling signalling
    -- Registered channel 15, PRI Signalling signalling
Aug  6 16:53:22 WARNING[6407]: chan_zap.c:1072 zt_open: Unable to specify
channel 17: No such device or address
Aug  6 16:53:22 ERROR[6407]: chan_zap.c:7059 mkintf: Unable to open
channel 17: No such device or address
here = 0, tmp->channel = 17, channel = 17
Aug  6 16:53:22 ERROR[6407]: chan_zap.c:10501 setup_zap: Unable to
register channel '1-15'
Aug  6 16:53:22 WARNING[6407]: loader.c:415 __load_resource: chan_zap.so:
load_module failed, returning -1
    -- Unregistered channel 1
    -- Unregistered channel 2
    -- Unregistered channel 3
    -- Unregistered channel 4
    -- Unregistered channel 5
    -- Unregistered channel 6
    -- Unregistered channel 7
    -- Unregistered channel 8
    -- Unregistered channel 9
    -- Unregistered channel 10
    -- Unregistered channel 11
    -- Unregistered channel 12
    -- Unregistered channel 13
    -- Unregistered channel 14
    -- Unregistered channel 15
Aug  6 16:53:22 WARNING[6407]: loader.c:555 load_modules: Loading module
chan_zap.so failed!

====================================================================== 

---------------------------------------------------------------------- 
 gaurav6628 - 08-06-07 06:58  
---------------------------------------------------------------------- 
This will work fine but what about the D channel which is used for
signalling .How the signalling will be through and calls will be made ???

What can be the problem with dchan=16 and bchan=17-31

Whose problem is this ??

Is it related to the Card or something else 

Issue History 
Date Modified   Username       Field                    Change               
====================================================================== 
08-06-07 06:58  gaurav6628     Note Added: 0068469                          
======================================================================