Kurt,<br><br><div class="gmail_quote">On Thu, Aug 26, 2010 at 9:18 PM, Kurt Lidl <span dir="ltr"><<a href="mailto:lidl@pix.net">lidl@pix.net</a>></span> wrote:<br><br><blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">
I've got an IP-only Asterisk-1.6 installation running on FreeBSD.<br>
<br>
(IP only in that the inbound trunking is coming over IAX,<br>
and then I have several SIP extensions registered to that<br>
installation.)<br>
<br>
I need to have dahdi timing for the IAX trunking to work.<br>
<br>
This has been working fine, but I had to change the Asterisk<br>
startup script to chmod the devices that dahdi creates.<br>
I'm sure there is some fancy devfs goo that could be done<br>
to make this happen, but I couldn't figure it out in 5 minutes,<br>
so I changed the startup script. (Included at the end of this<br>
message.)<br>
<br>
I wanted to run the entire asterisk configuration as a non-root<br>
user, which is also have I run the apache22 on that machine,<br>
which has "FreePBX" installed on it. (I submitted a couple of<br>
patches just before FreePBX 2.8 was released. Some of those made<br>
it into FreePBX tree, and some did not, but you can find them<br>
via their bug tracker interface.)<br>
<br>
It would be nice if there was a "reserved" UID:GID combination<br>
for running asterisk on FreeBSD in the /usr/ports framework.<br>
I have added some locally so my script can work, but I'd rather<br>
there was a "well known" default set that the Asterisk port<br>
would install on the system.<br></blockquote><div><br>I've just committed a change to the net/asterisk16 port to run under "asterisk" user/group.<br><br>Max <br><br></div></div>