[Asterisk-bsd] asterisk 1.8 && linksys spa400

[A.Rymkus]

Them are network devices, not the pci or pcie cards. I connect to them 
using SIP.

WBR
A.Rymkus


19.11.2010 7:34, Max Khon ?????:
> Hello!
>
> On Thu, Nov 18, 2010 at 7:48 PM, A.Rymkus <rymkus at mail.ru 
> <mailto:rymkus at mail.ru>> wrote:
>
>        Got troubles with subject - I have two SIP Linksys spa400 FXO
>     adaptors with latest firmware on board.
>        I writed correct config (at least it works for * v 1.4.29 and
>     spa400
>     with same firmware), and * successfully registered on both spa400
>     adaptors, but after that they started cyclic rebooting on
>     reregistration
>     (approx. every 90 seconds targeted me to this idea).
>        Then I broke registration with pushing extra letter to username in
>     register directive of sip.conf file. Voila, FXO doesn't reboot any
>     longer in cycle.
>        I want to find out where problem hides - in * with registration
>     procedures or in adaptors, so, please, direct me to method which will
>     allow me to do that.
>
>
> Which driver do you use for these cards? Can you show dmesg output?
> Do you get kernel panics? If yes, can you show the backtrace?
>
> Max
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-bsd/attachments/20101119/0b216607/attachment.htm