[Asterisk-bsd] Fwd: [AsteriskBrasil] Placa TE122P

[Wendell Silva]

I am configuring an Asterisk in FreeBSD 6.4, but I have a TE122 card from
Digium, I have two errors,


1 the plate is not rising:

[root at voip /usr/ports]# pciconf -lv

none2 at pci3:2:0:    class=0x020000 card=0x8001d161 chip=0x8001d161 rev=0x11
hdr=0x00
    vendor     = 'Digium, Inc'
    class      = network
    subclass   = ethernet

2 is the-vv command ztcfg to configure the channels, the following error
occurs:

[root at voip /usr/ports]# ztcfg -vv
Zaptel Version: zaptel-bsd-ng v0.0.1
Echo Canceller: MG2
Configuration
======================

SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: Clear channel (Default) (Slaves: 03)
.......................

Channel 30: Clear channel (Default) (Slaves: 30)
Channel 31: Clear channel (Default) (Slaves: 31)

31 channels to configure.

ZT_SPANCONFIG failed on span 1: Device not configured (6)


During the installation was fine, not made any mistake,

settings are:

#############cha_dahdi.conf:#####################
group=1
signalling=pri_cpe
switchtype=euroisdn
context=incoming
channel=1-15,17-31

###############zaptel.conf########################

span=1,1,0,ccs,hdb3
bchan=1-15,17-31
dchan=16

If anyone knows of something please give me a hand in this topic.

Thank you very much.

Att.

Wendell S. Bandeira

Sorry my bad english
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-bsd/attachments/20090708/13758a12/attachment.htm