[Asterisk-bsd] IRQ or timing problem with HFC-4S

[Oliver Schneider]

Hello,

Also schrieb Hans Petter Selasky am Mon, Oct 13, 2008 at 07:26:11PM +0200:
> On Monday 13 October 2008, Oliver Schneider wrote:
> > Hello,
> >
> > Also schrieb Hans Petter Selasky am Sat, Oct 11, 2008 at 10:29:01AM +0200:
> > > On Friday 10 October 2008, Oliver Schneider wrote:
> > > > My config is:
> > > > FreeBSD 6.2-STABLE
> > > > asterisk - 12-1.2.17 (yes I know, some old fashioned and unsecure, but
> > > > I haven't read about an attack over the ISDN bus)
> > > > i4b - ISDN4BSD, version 1.6.0, compiled May 23 2007 19:57:30
> > > > one external EURO ISDN line (normal consumer ISDN line)
> > > > one internal ISDN line connected to the HFC-4S in NT mode
> > > > Siemens Gigaset 3035 ISDN phone with 3 mobile handsets to HFC-4S
> > >
> > > Try switching to the version from svn. The tarballs are a little out of
> > > date.
> >
> > are there any changes which let you assume, that they will solve my
> > problem? As far as I read the lists, most improvments were inside the
> > echo canceller.
> >
> 
> Yes,
> 
> Last year, I think I fixed an IRQ lookup related to the S/T statemachine of 
> the 4S/8S boards from colognechip

so I upgraded to 
Asterisk asterisk-1.4.21.2_3, 
FreeBSD 7.1-PRELRELEASE
isdnconfig - configure ISDN4BSD, version 1.7.0, compiled Oct 17 2008
2008-10-09T14:49:20.792175Z
900
hselasky

I took the svn version of i4b. I think I still have the same problems,
as more DECT handsets are connected to the Gigaset 3035, as more
unstable the systems gets.

# vmstat -i
interrupt                          total       rate
irq0: clk                      129536595       1000
irq7: ppbus0 ppc0                      1          0
irq8: rtc                       16580940        128
irq9: ihfc0 vr0+++               4321795         33
irq15: ata1                       673788          5
Total                          151113119       1166

# uname -a
FreeBSD asterisk2.ko.kobo.de 7.1-PRERELEASE FreeBSD 7.1-PRERELEASE #1:
Fri Oct 17 00:35:37 UTC 2008

let me know if you need more (and which) debug information.

thanks
Oliver