[Asterisk-bsd] KNown working / not working zaptel based cards

Paulo Fragoso paulo at nlink.com.br
Wed May 9 09:32:33 MST 2007 

TDM2400 doesn't work with zaptel-bsd-1.4.1:

# pciconf -lv
wcte11xp0 at pci2:0:0:     class=0x028000 card=0x000179fe chip=0x0001e159 
rev=0x00 hdr=0x00
    vendor   = 'Tiger Jet Network Inc'
    device   = 'Multiple devices use this ID: General Purpose I/O 
Controller'
    class    = network
fxp0 at pci2:1:0:  class=0x020000 card=0x00098086 chip=0x12298086 rev=0x05 
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82550/1/7/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
    class    = network
    subclass = ethernet
none2 at pci2:4:0: class=0x020000 card=0x2400d161 chip=0x2400d161 rev=0x11 
hdr=0x00  <= TDM2400
    class    = network
    subclass = ethernet

# uname -a
FreeBSD xxx 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Wed May  9 13:17:42 BRT 
2007     paulo at xxx:/usr/src/sys/i386/compile/GENERIC  i386

# dmesg
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Wed May  9 13:17:42 BRT 2007
    paulo at xxx:/usr/src/sys/i386/compile/GENERIC
ACPI APIC Table: <INTEL  D865PERL>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2992.51-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
  
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4400<CNTX-ID,<b14>>
  Logical CPUs per core: 2
real memory  = 1072889856 (1023 MB)
avail memory = 1040896000 (992 MB)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <INTEL D865PERL> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82865 host to AGP bridge> mem 0xf8000000-0xfbffffff at 
device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xcc00-0xcc1f 
irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xd000-0xd01f 
irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xd400-0xd41f 
irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xd800-0xd81f 
irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network> at device 0.0 (no driver attached)
fxp0: <Intel 82558 Pro/100 Ethernet> port 0xbc00-0xbc1f mem 
0xf6aff000-0xf6afffff,0xff800000-0xff8fffff irq 22 at device 1.0 on pci2
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:a0:c9:e8:8d:88
pci2: <network, ethernet> at device 4.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH5 SATA150 controller> port 
0xec00-0xec07,0xe800-0xe803,0xe400-0xe407,0xe000-0xe003,0xdc00-0xdc0f 
irq 18 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on 
acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2992514744 Hz quality 800
Timecounters tick every 1.000 msec
acd0: CDROM <CD-ROM 52X/AKH/A63> at ata0-master UDMA33
ad4: 152626MB <SAMSUNG SP1614C SW100-34> at ata2-master SATA150
Trying to mount root from ufs:/dev/ad4s1a
Zapata Telephony Interface Registered on major 196
Echo Canceller: MG2
T1/E1 device: vendor=e159 device=1 subvendor=79fe
wcte11xp0: <Digium Wildcard TE110P T1/E1 Board> port 0xb800-0xb8ff mem 
0xff9ff000-0xff9fffff irq 21 at device 0.0 on pci2
WCT1xxP Attach for wcte11xp0: deviceID : 0xe159
wcte11xp0: [FAST]
FALC version: 00000005
TE110P: Setting up global serial parameters for E1 FALC V2.2
TE110P: Successfully initialized serial bus for card
Found a Wildcard: Digium Wildcard TE110P T1/E1
Registered tone zone 0 (United States / North America)

Paulo Fragoso.

Satej wrote, On 08/05/2007 20:45:
>
> I can confirm that the TE212P works fine with 1.4.1.
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Asterisk-BSD mailing list
> Asterisk-BSD at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-bsd
>

More information about the Asterisk-BSD mailing list