[Asterisk-bsd] Problems loading modules on FreeBSD Release 6.1

[David Bryan]

I've gotten the zaptel-bsd modules to compile, but I am now getting 
errors when attempting to load them.  This is a virgin FreeBSD 
6.1-Release, a GENERIC kernel, no userland source, but kernel sources.

Did I miss something?

I grabbed Version 68 of the trunk via svn...

Newt was installed via the ports (just did a cvsup this morning)
libpri has not been installed, nor has asterisk.

dmesg and errors to follow:

---- make load error -----
[root at test /home/dbryan/zaptel-bsd/trunk]# make load
make -C zaptel load
kldload ./zaptel.ko
kldload: can't load ./zaptel.ko: No such file or directory
*** Error code 1

Stop in /home/dbryan/zaptel-bsd/trunk/zaptel.
*** Error code 1

Stop in /home/dbryan/zaptel-bsd/trunk.
[root at test /home/dbryan/zaptel-bsd/trunk]#
-----


----- dmeg -----
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE #0: Sun May  7 04:32:43 UTC 2006
    root at opus.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (863.79-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 132907008 (126 MB)
avail memory = 120496128 (114 MB)
kbd1 at kbdmux0
acpi0: <GATEWA EA81510A> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem 
0xf8000000-0xfbffffff,0xffa80000-0xffafffff irq 11 at device 2.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
dc0: <ADMtek AN985 10/100BaseTX> port 0xd400-0xd4ff mem 
0xff8fcc00-0xff8fcfff irq 11 at device 9.0 on pci1
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: Ethernet address: 00:04:5a:43:ab:b7
pci1: <multimedia, audio> at device 10.0 (no driver attached)
pci1: <input device> at device 10.1 (no driver attached)
pci1: <simple comms> at device 11.0 (no driver attached)
pci1: <network, ethernet> at device 13.0 (no driver attached)
pci1: <multimedia, telephony> at device 13.1 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 
0xef40-0xef5f irq 3 at device 31.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 
0xef80-0xef9f irq 9 at device 31.4 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
fdc0: <floppy drive controller> port 
0x3f0-0x3f1,0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on 
acpi0
sio0: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 863789789 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 19623MB <IBM DTLA-305020 TW2OA60A> at ata0-master UDMA100
acd0: CDROM <FX4831T/R02C> at ata1-master UDMA33
Trying to mount root from ufs:/dev/ad0s1a
link_elf: symbol memmove undefined
KLD wcfxs.ko: depends on zaptel - not available
link_elf: symbol memmove undefined
KLD wcfxs.ko: depends on zaptel - not available
link_elf: symbol memmove undefined
-----