[Asterisk-bsd] * Not working after upgrade

[Frank Griffith]

Kim Culhan <w8hdkim at gmail.com> wrote:  On Mon, October 9, 2006 16:17, Frank Griffith wrote:
> Matthias Fechner wrote: Hello Frank,
>
>
> * Frank Griffith [09-10-06 07:49]:
>
>> I'm hoping you've got something there. If by all channels drivers you
>> mean zaptel, no I did not recompile zaptel. I simply updated my ports
>> collection and then did a "make deinstall" of * 1.2.9.1 then did a
>> "make install clean" using * 1.2.12.1.
>>
>>
>> Should I deinstall and remake libpri and the other dependencies as
>> well?

When you run 'make install' with the standard Asterisk build system
(not necessarily with a *BSD port) modules located at
/usr/local/lib/asterisk/modules may not be replaced with newer versions.

It might be worth removing the modules there first before running
'make reinstall' on the port, soo..

make deinstall

rm /usr/local/lib/asterisk/modules/*

make reinstall in the port directory

-kim
_______________________________________________
Asterisk-BSD mailing list
Asterisk-BSD at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-bsd
  
I just checked the /usr/local/lib/asterisk/modules directory and all files in there are dated Oct. 7th, the date of the 1st rebuild. Only one of them cdr_pgsql.so was dated today when I rebuilt again. So I took your advice and emptied this directory before doing the rebuild. The rebuild on my system takes over an hour, its a slow P166 with only 96MB of RAM. When it completes I'll try it out again.
   

 				
---------------------------------
Get your own web address for just $1.99/1st yr. We'll help. Yahoo! Small Business.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-bsd/attachments/20061009/19f6854e/attachment.htm