[Asterisk-bsd] Asterisk and AVM PCI passive ISDN card - cannot hear anything

[Matthias Fechner]

Hello Hans,

* Hans Petter Selasky <hselasky at c2i.net> [19-03-06 00:30]:
> Could you try something as simple as this:
> 
> exten => 99,1,Ringing
> exten => 99,2,Wait,4
> exten => 99,3,Answer
> exten => 99,4,Playback(invalid)
> exten => 99,5,Hangup

I can hear a ringing and after some time i get a hungup on the phone.
The log says:
     -- Executing Ringing("CAPI/ISDN1/99-0", "") in new stack
     -- Executing Wait("CAPI/ISDN1/99-0", "4") in new stack
     -- Executing Answer("CAPI/ISDN1/99-0", "") in new stack
     -- Executing Playback("CAPI/ISDN1/99-0", "invalid") in new stack
    -- Playing 'invalid' (language '')
      == capi_send_detect_dtmf_req:2992:ENTRY=ISDN1:PLCI=0x1d00:PBX_CHAN=CAPI/ISDN1/99-0:
  ==   Setting up DTMF detector, flag=1
    -- Executing Hangup("CAPI/ISDN1/99-0", "") in new stack
  == Spawn extension (capi-in, 99, 5) exited non-zero on 'CAPI/ISDN1/99-0'

> What version of ISDN4BSD are you using?

I use the subversion version from url="svn://svn.turbocat.net/i4b"
And there the version in the trunk directory.
Revision: 183

> What version of chan_capi are you using?

The same subversion version:
Revision: 183

> What do you have in "capi.conf" ?

[general]
nationalprefix=0
internationalprefix=00
rxgain=1
txgain=1

[ISDN1]
isdnmode=msn
msn=98
incomingmsn=97,98,99
controller=0
group=1
softdtmf=on
relaxdtmf=on
accountcode=
context=capi-in
holdtype=local
echocancel=no
echosquelch=no
devices=2
		 
> Could you try a "HFC-S PCI A" based ISDN card instead of the Fritz one ?

sry, but I have just in time no money to buy any coputerhardware, but
I have a ITK1 active ISDN card here if you can get one card working,
it would be fantastic.

Thanks a lot for your help! :)

Best regards,
Matthias