[Asterisk-bsd] 6.X compatible version

[Bradley W. Dutton]

I experience crashes when using the zaptel driver under 6.x as well.
Please note that I am using some sort of knock off card, it's not an
official Digium card. I rebuilt the zaptel port just before booting into
single user mode and running this.

Thanks,
Brad

FreeBSD uno 6.0-BETA5 FreeBSD 6.0-BETA5 #0: Fri Sep 23 01:26:42 PDT 2005  
  root at uno:/usr/obj/usr/src/sys/UNO  i386


# zttest
Opened pseudo zap interface, measuring accuracy...
99.987793% 99.987793% 99.987793%
100.000000% 99.987793% 99.987793% 99.987793%
99.987793% 99.987793% 99.987793% 99.987793% 99.987793% ^C

r 12 passes ---e

Fatal trap 12: page fault while in kernel mode
fault virtual address   = 0x10
fault code              = supervisor read, page not present
instruction pointer     = 0x20:0xc04e9633
stack pointer           = 0x28:0xde3a7b5c
frame pointer           = 0x28:0xde3a7bcc
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, def32 1, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 75 (zttest)
trap number             = 12
panic: page fault
Uptime: 2m54s
Cannot dump. No dump device defined.




> Richard Neese wrote:
>
>>On October 3, 2005 05:34 pm, Alexander Timoshenko wrote:
>>try running ztcfg it segfaultsthe system
>>
>>
>>
>     uname -a?
>
>>
>>
>>
>>>    Current trunk should be compatible with FreeBSD 6.X. I've tested it
>>>a bit with
>>>TDM410P and got no major problems. I'm going to test more this week but
>>>any feedback is welcome.
>>>
>>>
>>
>>
>>
>
> _______________________________________________
> Asterisk-BSD mailing list
> Asterisk-BSD at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-bsd
>