[Asterisk-bsd] (no subject)

[Mike Sturdee]

I had been using Revision 1033 with the Asterisk port.

Since updating the zaptel-bsd modules to Revision 1060, there is a 
constant flow of the following errors, and calls across the pri sound 
"glitchy" when there is a corresponding error on the CLI.

I had the same problem when I tried to update using a couple different 
revisions from 105x.


May 20 08:47:23 NOTICE[535]: chan_zap.c:7827 pri_dchannel: PRI got event: 
HDLC Abort (6) on Primary D-channel of span 1
May 20 08:47:54 NOTICE[535]: chan_zap.c:7827 pri_dchannel: PRI got event: 
HDLC Bad FCS (8) on Primary D-channel of span 1
May 20 08:48:25 NOTICE[535]: chan_zap.c:7827 pri_dchannel: PRI got event: 
HDLC Bad FCS (8) on Primary D-channel of span 1
May 20 08:48:56 NOTICE[535]: chan_zap.c:7827 pri_dchannel: PRI got event: 
HDLC Bad FCS (8) on Primary D-channel of span 1
May 20 08:49:27 NOTICE[535]: chan_zap.c:7827 pri_dchannel: PRI got event: 
HDLC Abort (6) on Primary D-channel of span 1
May 20 08:49:58 NOTICE[535]: chan_zap.c:7827 pri_dchannel: PRI got event: 
HDLC Bad FCS (8) on Primary D-channel of span 1

The modules I have loaded:
zaptel.ko
wct1xxp.ko

FreeBSD 5.3-STABLE
FreeBSD 5.4-STABLE

zaptel.conf:
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
loadzone = us

If I replace zaptel.ko & wct1xxp.ko with the ones from my old rev 1033, 
the problem ceases.

If there is anything I can do to help in tracking down the problem, please 
let me know!

-Mike

----------------------------
Mike Sturdee
Network Engineer
Pathway Internet Services
616.774.3131