[Asterisk-bsd] Zaptel X100P card dropping calls
Chris Stenton
jacs at gnome.co.uk
Thu May 5 06:32:58 CDT 2005
Does asterisk detect you plugging and unplugging the phone line?
I think there is a test prog that puts the card onhook/offhook. See if that
works.
Can you dial out?
Chris
----- Original Message -----
From: "Kirk Davis" <Kirk.Davis at epsb.ca>
To: "'Asterisk on BSD discussion'" <asterisk-bsd at lists.digium.com>
Sent: Wednesday, May 04, 2005 11:17 PM
Subject: RE: [Asterisk-bsd] Zaptel X100P card dropping calls
> Right not I don't have any SIP phones connected up to it. I'm using the
> default install from the ports and it should pick up an incoming POTS call
> using the zaptel card and play the demo message. Zap->asterisk
>
> Here is the context that answers the call from extensions.conf
> [demo]
> ;
> ; We start with what to do when a call first comes in.
> ;
> exten => s,1,Wait,1 ; Wait a second, just for fun
> exten => s,2,Answer ; Answer the line
> exten => s,3,DigitTimeout,5 ; Set Digit Timeout to 5 seconds
> exten => s,4,ResponseTimeout,10 ; Set Response Timeout to 10
> seconds
> exten => s,5,BackGround(demo-congrats) ; Play a congratulatory message
> exten => s,6,BackGround(demo-instruct) ; Play some instructions
>
> And the output of asterisk -vvvvvvv -c -f
>
> -- Starting simple switch on 'Zap/1-1'
> May 4 16:08:20 NOTICE[31109]: chan_zap.c:5626 ss_thread: Got event
> 2 (Ring/Answered)...
> -- Executing Wait("Zap/1-1", "1") in new stack
> -- Executing Answer("Zap/1-1", "") in new stack
> -- Executing DigitTimeout("Zap/1-1", "5") in new stack
> -- Set Digit Timeout to 5
> -- Executing ResponseTimeout("Zap/1-1", "10") in new stack
> -- Set Response Timeout to 10
> -- Executing BackGround("Zap/1-1", "demo-congrats") in new stack
> -- Playing 'demo-congrats' (language 'en')
> -- Executing BackGround("Zap/1-1", "demo-instruct") in new stack
> -- Playing 'demo-instruct' (language 'en')
>
> << Right here it answers the POTS line and then hangs it up >>
>
> -- Timeout on Zap/1-1
> == CDR updated on Zap/1-1
> -- Executing Goto("Zap/1-1", "#|1") in new stack
> -- Goto (default,#,1)
> -- Executing Playback("Zap/1-1", "demo-thanks") in new stack
> -- Playing 'demo-thanks' (language 'en')
> -- Executing Hangup("Zap/1-1", "") in new stack
> == Spawn extension (default, #, 2) exited non-zero on 'Zap/1-1'
> -- Hungup 'Zap/1-1'
>
>
>
> Also even though it has dropped the call, asterisk doesn't seem to
> detect the dropped call.
>
> ---- Kirk
>
>
>
>
> -----Original Message-----
> From: asterisk-bsd-bounces at lists.digium.com
> [mailto:asterisk-bsd-bounces at lists.digium.com] On Behalf Of Kiel R
> Stirling
> Sent: May 3, 2005 8:34 PM
> To: Asterisk on BSD discussion
> Subject: Re: [Asterisk-bsd] Zaptel X100P card dropping calls
>
> Umm what I am thinking is that maybe * is dropping the call due to a codec
> issue. can u send more details on your setup eg, sip->asterisk->zap ??
> inbound call goes zap->asterisk->h323?
>
> -Kiel
>
> ----- Original Message -----
> From: "Kirk Davis" <Kirk.Davis at epsb.ca>
> To: "'Asterisk on BSD discussion'" <asterisk-bsd at lists.digium.com>
> Sent: Wednesday, May 04, 2005 12:30 AM
> Subject: RE: [Asterisk-bsd] Zaptel X100P card dropping calls
>
>
>> Hmmm... I'm not sure where to go from here then.
>>
>> I removed all unneeded hardware from the system and also made sure the
>> X100P
>> card was locked down to it's own interrupt. I cvs'ed up my FreeBSD to the
>> latest 5.3 (I'm waiting until 5.4 is out of RC status) and rebuilt the
>> asterisk and zaptel ports.
>>
>> The only thing I have added from the stock install was to create the
>> /usr/local/etc/zaptel.conf file as follows:
>>
>> # Span 1: WCFXO/0 "Generic Clone Board 1"
>> fxsks=1
>> # Global data
>> loadzone = us
>> defaultzone = us
>>
>> I also changed the default /usr/local/etc/asterisk/zapata.conf. I
>> changed
>> the signalling to signalling=fxs_ks and added channel => 1 at the end.
>>
>> If I don't run asterisk it will not pick up the call, just rings. When I
>> run
>> asterisk it will answer the call after the third ring but then just drops
>> the call right away but asterisk doesn't detect the dropped call and
>> continues to go though it's Background tasks.
>>
>> I'm stuck now and will even accept and wild guesses ;-)
>>
>> ---- Kirk
>>
>> -----Original Message-----
>> From: asterisk-bsd-bounces at lists.digium.com
>> [mailto:asterisk-bsd-bounces at lists.digium.com] On Behalf Of Kiel R
>> Stirling
>> Sent: May 2, 2005 5:02 PM
>> To: Asterisk on BSD discussion
>> Subject: Re: [Asterisk-bsd] Zaptel X100P card dropping calls
>>
>> Hi,
>>
>> I run 5.3-STABLE with an XP clone and the ported versions of the required
>> software. Touch wood, so far I've been really happy with the results. Are
>> you sure its not an interrupt problem? I've seen hardware clashes do
>> funny
>> things to theses cards.
>>
>> -Kiel
>>
>>
>> ----- Original Message -----
>> From: "Luigi Rizzo" <rizzo at icir.org>
>> To: "Asterisk on BSD discussion" <asterisk-bsd at lists.digium.com>
>> Sent: Tuesday, May 03, 2005 8:39 AM
>> Subject: Re: [Asterisk-bsd] Zaptel X100P card dropping calls
>>
>>
>>> no idea about 5.3 but things do work for me on FreeBSD 4.11 with
>>> the driver in the ports (patched to fix a bug in the loader glue
>>> that should affect only 4.x)
>>>
>>> cheers
>>> luigi
>>>
>>> On Mon, May 02, 2005 at 04:28:59PM -0600, Kirk Davis wrote:
>>>> Hi,
>>>> I'm not sure if this is a zaptel-bsd driver problem or asterisk. I
>>>> have looked through the archives with out much luck.
>>>>
>>>> I have a X100P Clone Card. It works perfectly find under linux.
>>>> I'm now trying to get Asterisk 1.0.7 (from the ports) working under
>>>> FreeBSD
>>>> 5.3. I have tried the zaptel drivers from the ports collection and
>>>> also
>>>> the
>>>> latest SVN snapshot with the same results.
>>>>
>>>> When I dial the number of the POTS line that the zaptel card is
>>>> connected to, asterisk detects the incoming call. The line rings 3
>>>> time
>>>> (one more after the Answer("Zap/1-1", "") line shows on asterisk).
>>>> Then
>>>> the
>>>> line is dropped by the X100P card. Asterisk doesn't seem to detect the
>>>> dropped call because it goes on to try and play the background message
>>>> I
>>>> have and then eventually times out. I get the Timeout message long
>>>> after
>>>> the call is already dropped.
>>>>
>>>> Here is what I see under asterisk:
>>>>
>>>> -- Starting simple switch on 'Zap/1-1'
>>>> May 2 16:15:37 NOTICE[55666]: chan_zap.c:5626 ss_thread: Got event
>>>> 2 (Ring/Answered)...
>>>> -- Executing Answer("Zap/1-1", "") in new stack
>>>> -- Executing BackGround("Zap/1-1", "demo-instruct") in new stack
>>>> -- Playing 'demo-instruct' (language 'en')
>>>> May 2 16:16:55 WARNING[55666]: pbx.c:1949 ast_pbx_run: Timeout, but
>>>> no rule 't' in context 'default'
>>>> -- Hungup 'Zap/1-1'
>>>>
>>>> Any ideas where to begin trouble shooting this?
>>>>
>>>> Here is the zaptel device information from dmesg
>>>>
>>>> May 1 11:33:17 devel kernel: Zapata Telephony Interface Registered
>>>> on major 196
>>>> May 1 11:33:17 devel kernel: ZapTel device: vendor=e159 device=1
>>>> subvendor=8086
>>>> May 1 11:33:17 devel kernel: wcfxo0: <Generic Clone> port
>>>> 0x9800-0x98ff mem 0xf9023000-0xf9023fff irq 22 at device 11.0 on pci2
>>>> May 1 11:33:17 devel kernel: ZapTel Attach for wcfxo0: deviceID :
>>>> 0xe159
>>>> May 1 11:33:17 devel kernel: wcfxo0: [GIANT-LOCKED]
>>>> May 1 11:33:18 devel kernel: wcfxo: DAA mode is 'FCC'
>>>> May 1 11:33:18 devel kernel: Found a Wildcard FXO: Generic Clone
>>>> May 1 11:33:18 devel kernel: ZapTel device loaded.
>>>> May 1 11:33:42 devel kernel: Registered tone zone 0 (United States
>>>> / North America)
>>>>
>>>> ----- Kirk
>>>
>>>> _______________________________________________
>>>> Asterisk-BSD mailing list
>>>> Asterisk-BSD at lists.digium.com
>>>> http://lists.digium.com/mailman/listinfo/asterisk-bsd
>>>
>>> _______________________________________________
>>> Asterisk-BSD mailing list
>>> Asterisk-BSD at lists.digium.com
>>> http://lists.digium.com/mailman/listinfo/asterisk-bsd
>>>
>>
>> _______________________________________________
>> Asterisk-BSD mailing list
>> Asterisk-BSD at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-bsd
>> _______________________________________________
>> Asterisk-BSD mailing list
>> Asterisk-BSD at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-bsd
>>
>
> _______________________________________________
> Asterisk-BSD mailing list
> Asterisk-BSD at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-bsd
> _______________________________________________
> Asterisk-BSD mailing list
> Asterisk-BSD at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-bsd
>
More information about the Asterisk-BSD
mailing list