[Asterisk-bsd] Zaptel X100P card dropping calls

[Kirk Davis]

Hi,
	I'm not sure if this is a zaptel-bsd driver problem or asterisk.  I
have looked through the archives with out much luck.

	I have a X100P Clone Card.  It works perfectly find under linux.
I'm now trying to get Asterisk 1.0.7 (from the ports) working under FreeBSD
5.3.  I have tried the zaptel drivers from the ports collection and also the
latest SVN snapshot with the same results.

	When I dial the number of the POTS line that the zaptel card is
connected to, asterisk detects the incoming call.  The line rings 3 time
(one more after the Answer("Zap/1-1", "") line shows on asterisk).  Then the
line is dropped by the X100P card.  Asterisk doesn't seem to detect the
dropped call because it goes on to try and play the background message I
have and then eventually times out.  I get the Timeout message long after
the call is already dropped.

	Here is what I see under asterisk:

	 -- Starting simple switch on 'Zap/1-1'
	May  2 16:15:37 NOTICE[55666]: chan_zap.c:5626 ss_thread: Got event
2 (Ring/Answered)...
    	-- Executing Answer("Zap/1-1", "") in new stack
    	-- Executing BackGround("Zap/1-1", "demo-instruct") in new stack
    	-- Playing 'demo-instruct' (language 'en')
	May  2 16:16:55 WARNING[55666]: pbx.c:1949 ast_pbx_run: Timeout, but
no rule 't' in context 'default'
    	-- Hungup 'Zap/1-1'

	Any ideas where to begin trouble shooting this?

	Here is the zaptel device information from dmesg

	May  1 11:33:17 devel kernel: Zapata Telephony Interface Registered
on major 196
	May  1 11:33:17 devel kernel: ZapTel device: vendor=e159 device=1
subvendor=8086
	May  1 11:33:17 devel kernel: wcfxo0: <Generic Clone> port
0x9800-0x98ff mem 0xf9023000-0xf9023fff irq 22 at device 11.0 on pci2
	May  1 11:33:17 devel kernel: ZapTel Attach for wcfxo0: deviceID :
0xe159
	May  1 11:33:17 devel kernel: wcfxo0: [GIANT-LOCKED]
	May  1 11:33:18 devel kernel: wcfxo: DAA mode is 'FCC'
	May  1 11:33:18 devel kernel: Found a Wildcard FXO: Generic Clone
	May  1 11:33:18 devel kernel: ZapTel device loaded.
	May  1 11:33:42 devel kernel: Registered tone zone 0 (United States
/ North America)

----- Kirk
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-bsd/attachments/20050502/442962fa/attachment.htm