[Asterisk-bsd] zttest on TDM400P

[Lane]

On Sunday 01 May 2005 07:39, Kim Culhan wrote:
> --- Matt Riddell <matt.riddell at sineapps.com> wrote:
> > Hi,
> >
> > After seeing a post from someone in the Asterisk users list on the
> > topic
> > of frame slips with the TDM400P, it turns out that he isn't getting
> > them
> > on FreeBSD.
> >
> > Any chance some other people could run zttest and post back the
> > results?
> >
> > Most Linux systems are getting less than 100% at the moment (albeit
> > not
> > by much).
> >
> > What do you guys get?
>
> I put a post on the Asterisk list yesterday with the output of
> zttest -v, showing nothing but:
>
> 8192 samples in 8192 sample intervals 100.000000%
>
> When running this on another machine which is running asterisk
> compiled from the same source, the results are not quite as good
> showing 100.000000% on 59 of 60 passes. The exception showing
> 99.987793%
>
> Should the test be run over a span of several minutes ? Hours ?
>
> There are differences in the machines, a slower cpu in the case
> above among others..
>
> Soo.. what do others get?
>
> -kim
>
I get 8192 samples in 8191 sample intervals 99.987793% on a Dell SC420 with 
128Meg o' Ram, Intel(R) Celeron(R) CPU 2.53GHz (2527.01-MHz 686-class CPU) on
FreeBSD 5.3-RELEASE-p5 #0

He only runs asterisk so 128Meg seems to be fine for now.

lane