[Asterisk-bsd] zaptel problem with TDM11B

Wed Jun 1 22:29:33 CDT 2005

Yes I have seen it and Kim Culhan also has this problem.

There was no real solution to this one. Only some suggestions by Kim that I had no time to follow so I don't know if the suggestions
work or not.

You can check this thread in the archives:
http://lists.digium.com/pipermail/asterisk-bsd/2005-May/000893.html

-----Original Message-----
From: asterisk-bsd-bounces at lists.digium.com [mailto:asterisk-bsd-bounces at lists.digium.com] On Behalf Of Staffan Ulfberg
Sent: Wednesday, June 01, 2005 7:57 PM
To: asterisk-bsd at lists.digium.com
Subject: [Asterisk-bsd] zaptel problem with TDM11B

Hello,

Sometimes (maybe once a week), my zaptel (TDM11B, i.e., TDM400P with
one FXS and one FXO module) driver (the lastest svn version of wcfxs
from the zaptel-bsd repository) "hangs": My analog phone connected to
the fxs interface does not work anymore.  The fxo interface is not
used at all, and is not even configured in zaptel.conf.

When this happens, a lot of information is repeatedly logged in my
syslog (and dmesg) -- about once a second the following is output:

Jun  2 01:45:37 multivac kernel: Ouch, part reset, quickly restoring reality (0)
Jun  2 01:45:37 multivac kernel: !!!!!!! DTMF_ROW_0_PEAK  iREG 0 = 0  should be 
55c2
Jun  2 01:45:37 multivac kernel: !!!!!!! DTMF_ROW_1_PEAK  iREG 1 = 0  should be 
51e6
Jun  2 01:45:37 multivac kernel: !!!!!!! DTMF_ROW2_PEAK  iREG 2 = 0  should be 4
b85
Jun  2 01:45:37 multivac kernel: !!!!!!! DTMF_ROW3_PEAK  iREG 3 = 0  should be 4
937
Jun  2 01:45:37 multivac kernel: !!!!!!! DTMF_COL1_PEAK  iREG 4 = 0  should be 3
333
Jun  2 01:45:37 multivac kernel: !!!!!!! DTMF_FWD_TWIST  iREG 5 = 0  should be 2
02
Jun  2 01:45:37 multivac kernel: !!!!!!! DTMF_RVS_TWIST  iREG 6 = ff37  should b
e 202
Jun  2 01:45:37 multivac kernel: !!!!!!! DTMF_ROW_RATIO_TRES  iREG 7 = 0  should
 be 198
Jun  2 01:45:37 multivac kernel: !!!!!!! DTMF_COL_RATIO_TRES  iREG 8 = 0  should
 be 198
Jun  2 01:45:37 multivac kernel: !!!!!!! DTMF_ROW_2ND_ARM  iREG 9 = 2  should be
 611
Jun  2 01:45:37 multivac kernel: !!!!!!! DTMF_COL_2ND_ARM  iREG a = 0  should be
 202
Jun  2 01:45:37 multivac kernel: !!!!!!! DTMF_PWR_MIN_TRES  iREG b = 0  should b
e e5
Jun  2 01:45:37 multivac kernel: !!!!!!! DTMF_OT_LIM_TRES  iREG c = 2  should be
 a1c
Jun  2 01:45:37 multivac kernel: !!!!!!! OSC1_COEF  iREG d = 0  should be 7b30
Jun  2 01:45:37 multivac kernel: !!!!!!! OSC1X  iREG e = 0  should be 63
Jun  2 01:45:37 multivac kernel: !!!!!!! OSC1Y  iREG f = 1c  should be 0
Jun  2 01:45:37 multivac kernel: !!!!!!! OSC2_COEF  iREG 10 = 0  should be 7870
Jun  2 01:45:37 multivac kernel: !!!!!!! OSC2X  iREG 11 = 0  should be 7d
Jun  2 01:45:37 multivac kernel: !!!!!!! OSC2Y  iREG 12 = 70  should be 0
Jun  2 01:45:37 multivac kernel: !!!!!!! RING_OSC  iREG 14 = 0  should be 7ef0
Jun  2 01:45:37 multivac kernel: !!!!!!! RING_X  iREG 15 = 0  should be 160
Jun  2 01:45:37 multivac kernel: !!!!!!! PULSE_ENVEL  iREG 17 = 0  should be 200
0
Jun  2 01:45:37 multivac kernel: !!!!!!! PULSE_X  iREG 18 = 0  should be 2000
Jun  2 01:45:37 multivac kernel: !!!!!!! RECV_DIGITAL_GAIN  iREG 1a = 0  should 
be 2000
Jun  2 01:45:37 multivac kernel: !!!!!!! XMIT_DIGITAL_GAIN  iREG 1b = 0  should 
be 4000
Jun  2 01:45:37 multivac kernel: !!!!!!! LOOP_CLOSE_TRES  iREG 1c = 0  should be
 1000
Jun  2 01:45:37 multivac kernel: !!!!!!! RING_TRIP_TRES  iREG 1d = 0  should be 
3600
Jun  2 01:45:37 multivac kernel: !!!!!!! COMMON_MIN_TRES  iREG 1e = 0  should be
 1000
Jun  2 01:45:37 multivac kernel: !!!!!!! COMMON_MAX_TRES  iREG 1f = 0  should be
 200
Jun  2 01:45:37 multivac kernel: !!!!!!! PWR_ALARM_Q1Q2  iREG 20 = 0  should be 
7c0
Jun  2 01:45:37 multivac kernel: !!!!!!! PWR_ALARM_Q3Q4  iREG 21 = 0  should be 
2600
Jun  2 01:45:37 multivac kernel: !!!!!!! PWR_ALARM_Q5Q6  iREG 22 = 0  should be 
1b80
Jun  2 01:45:37 multivac kernel: !!!!!!! LOOP_CLOSURE_FILTER  iREG 23 = 0  shoul
d be 8000
Jun  2 01:45:37 multivac kernel: !!!!!!! RING_TRIP_FILTER  iREG 24 = 80  should 
be 320
Jun  2 01:45:37 multivac kernel: !!!!!!! TERM_LP_POLE_Q1Q2  iREG 25 = 0  should 
be 8c
Jun  2 01:45:37 multivac kernel: !!!!!!! TERM_LP_POLE_Q3Q4  iREG 26 = 0  should 
be 100
Jun  2 01:45:37 multivac kernel: !!!!!!! TERM_LP_POLE_Q5Q6  iREG 27 = 8c  should
 be 10
Jun  2 01:45:37 multivac kernel: !!!!!!! CM_BIAS_RINGING  iREG 28 = 0  should be
 c00
Jun  2 01:45:37 multivac kernel: !!!!!!! DCDC_MIN_V  iREG 29 = 0  should be c00
Jun  2 01:45:37 multivac kernel: !!!!!!! DCDC_XTRA  iREG 2a = 0  should be 1000
Jun  2 01:45:37 multivac kernel: !!!!!!! LOOP_CLOSE_TRES_LOW  iREG 2b = 0  shoul
d be 1000
Jun  2 01:45:37 multivac kernel: !!!!! Init Indirect Registers UNSUCCESSFULLY.
Jun  2 01:45:37 multivac kernel: Indirect Registers failed verification.

When this happens, I can unload the kernel module, and reload it, and
operation resumes to normal.

I've seen this since I started using Asterisk a few months ago.  Has
anyone else seen the problem?

Staffan
_______________________________________________
Asterisk-BSD mailing list
Asterisk-BSD at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-bsd