[Asterisk-bsd] Re: FreeBSD-6/Zaptel-0.10 panic on startup

[Bradley W. Dutton]

Hi,

I just updated to FreeBSD 6-BETA1 and am seeing a similar panic. I was
previously running 5.4 Stable with the .10 zaptel drivers with no
problems.  I did portupgrade -f misc/zaptel as well. Let me know what I
can do to help troubleshoot.

Thanks,
Brad



# /usr/local/etc/rc.d/zaptel.sh start
Zapata Telephony Interface Registered on major 196
ZapTel device: vendor=e159 device=1 subvendor=8086
wcfxo0: <Generic Clone> port 0xd400-0xd4ff mem 0xdd010000-0xdd010fff irq
11 at device 9.0 on pci0
ZapTel Attach for wcfxo0: deviceID : 0xe159
wcfxo0: [GIANT-LOCKED]
wcfxo: DAA mode is 'FCC'
Found a Wildcard FXO: Generic Clone
ZapTel device loaded.
#
#
# zttest
Opened pseudo zap interface, measuring accuracy...
100.000000% 100.000000% 100.000000% 100.000000% 100.000000% 100.000000%
100.000000%
100.000000% 100.000000% 100.000000% 100.000000% ^C

r 11 passes ---e

Fatal trap 12: page fault while in kernel mode
fault virtual address   = 0x10
fault code              = supervisor read, page not present
instruction pointer     = 0x20:0xc04e87d3
stack pointer           = 0x28:0xd56cbb64
frame pointer           = 0x28:0xd56cbbd4
code segment            = base 0x0, limit 0xfffff, type 0x1b
                        = DPL 0, pres 1, def32 1, gran 1
processor eflags        = interrupt enabled, resume, IOPL = 0
current process         = 81 (zttest)
trap number             = 12
panic: page fault
Uptime: 1m31s
Cannot dump. No dump device defined.
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...