[Asterisk-bsd] Few questions about Asterisk

Chris Stenton jacs at gnome.co.uk
Wed Aug 3 02:24:05 CDT 2005 

----- Original Message ----- 
From: "Ganbold Tsagaankhuu" <ganbold at gmail.com>
To: <asterisk-bsd at lists.digium.com>
Sent: Wednesday, August 03, 2005 1:29 AM
Subject: [Asterisk-bsd] Few questions about Asterisk


> Hello,
>
> I have few questions about Asterisk.
> I installed Asterisk from CVS on FreeBSD and I made cvsup 2 days ago.
>
> 1.I couldn't find Asterisk version using "asterisk -V" command.
>
> How can I to find version information?

use show version from the console

>
> 2.I am using Wildcard X101P (FXO) and Wildcard TDM400P REV E/F (FXS)on
> it.
>
> I tried Asterisk CallerID feature, but unable to get it.
> I tried callerid signaling V23, Bell202, DTMF, no success. Finally, I
> found in our country (Mongolia) PSTN/Cellular provider send FSK/ETSI
> type of CallerID.

This question is better asked on asterisk users. In the UK we use FSK ETSI 
PRI signaling which is v23.

You need to find out which encoding method is used in your country ie where 
the data is kept. In australia its on the third ring so you can't answer the 
call for the first 3 rings etc.

Its not asterisk its what your FXO card supports. There was some patches for 
the wildcard 101 for v23 software support but I am not sure if they were 
kept in the source tree if you find thats what you need.


>
> Is Asterisk support such type of CallerID signaling?
>
> If no, is there any way to get it?
>

I don't think you should answer the call before you dial out over zaptel.

use asterisk -vvvvvvr to see whats going on.

> 3.I enjoyed Asterisk most of feature until now. I registered X-Pro
> softphone, SIP analog and analog phone connected to FXS port too.
>
> There one problem is I am unable to make outgoing call from SIP phone,
> softphone, analog phone through FXO port.
>
> Following is my Asterisk configuration:
> ------------------------------------------
> zaptel.conf
> loadzone=us
> defaultzone=us
> fxsks=1
> fxoks=2
>
>
> zapata.conf
> context=bell
> signaling=fxs_ks
> group=1
> channel => 1
>
>
> context=home
> group=2
> signalling=fxo_ks
> channel => 2
>
>
> sip.conf
> [88888888]
> type=friend
> username=88888888
> ;secret=1111
> host=dynamic
> nat=yes
> defaultip=192.168.1.5
> context=bell
> reinvite=no
> canreinvite=no
> callerid=88888888
> mailbox=88888888 at local
> allow=g729
> allow=g723
> allow=all
>
>
> [99999999]
> type=friend
> username=99999999
> ;secret=1111
> host=dynamic
> nat=yes
> defaultip=192.168.1.1
> context=bell
> reinvite=no
> canreinvite=no
> callerid=99999999
> mailbox=99999999 at local
> allow=g729
> allow=g723
>
>
> extensions.conf
> [bell]
> exten => s,1,Wait
> exten => s,2,Answer
> exten => s,3,Playback(greetings)
> exten => s,4,WaitExten
>
>
> ; used to record prompts
> exten => 205,1,Wait(2)
> exten => 205,2,Record(/tmp/greetings:alaw)
> exten => 205,3,Wait(2)
> exten => 205,4,Playback(/tmp/greetings)
> exten => 205,5,Wait(2)
> exten => 205,6,Hangup
>
>
> exten => 111,1,Dial(CONSOLE/dsp)
> exten => 111,2,Hangup
>
>
> exten => 100,1,Answer
> exten => 100,2,MusicOnHold()
> exten => 100,4,Hangup
>
>
> exten => 200,1,VoicemailMain
>
>
> exten => 300,1,Dial(Zap/2)
>
>
> exten => 400,1,Voicemail(99999)
>
>
> exten => 800,1,MeetMe(100|Mp)
> exten => 800,2,Hangup
>
>
> exten => 601,1,WaitMusicOnHold(30)
>
>
> exten => 700,1,Dial(SIP/88888888,20,rt)
> exten => 900,1,Dial(SIP/99999999,20,rt)
>
>
> exten => _ZXXX,1,Answer
> exten => _ZXXX,2,Dial(Zap/g1/${EXTEN})
> exten => _ZXXXX,1,Answer
> exten => _ZXXXX,2,Dial(Zap/g1/${EXTEN})
> exten => _NXXXXX,1,Answer
> exten => _NXXXXX,2,Dial(Zap/g1/${EXTEN})
> exten => _NXXXXXXX,1,Answer
> exten => _NXXXXXXX,2,Dial(Zap/g1/${EXTEN})
>
>
> [home]
> exten => s,1,Playback(greetings)
> exten => 100,1,Answer
> exten => 100,2,MusicOnHold()
> exten => 100,4,Hangup
>
>
> exten => 111,1,Dial(CONSOLE/dsp)
> exten => 111,4,Hangup
>
>
> exten => 700,1,Dial(SIP/88888888,20,rt)
> exten => 900,1,Dial(SIP/99999999,20,rt)
>
>
> exten => _ZXXX,1,Answer
> exten => _ZXXX,2,Dial(Zap/g1/${EXTEN})
> exten => _ZXXXX,1,Answer
> exten => _ZXXXX,2,Dial(Zap/g1/${EXTEN})
> exten => _NXXXXX,1,Answer
> ;exten => _NXXXXX,2,SetVar(TIMEOUT(AbsoluteTimeout)=10)
> exten => _NXXXXX,3,Dial(Zap/g1/${EXTEN})
> exten => _NXXXXXXX,1,Answer
> exten => _NXXXXXXX,2,Dial(Zap/g1/${EXTEN})
>
>
> I can to see following in /var/log/messages when I make outgoing call.
>
>
> Jul 20 00:50:26 boldsoft kernel: Zapata Telephony Interface Registered
> on major 196
> Jul 20 00:50:26 boldsoft kernel: ZapTel device: vendor=e159 device=1
> subvendor=8085
> Jul 20 00:50:26 boldsoft kernel: wcfxo0: <Wildcard X101P> port
> 0xe800-0xe8ff mem 0xfaffe000-0xfaffefff irq 18 at device 9.0 on
> pci2
> Jul 20 00:50:26 boldsoft kernel: ZapTel Attach for wcfxo0: deviceID :
> 0xe159
> Jul 20 00:50:26 boldsoft kernel: wcfxo: DAA mode is 'FCC'
> Jul 20 00:50:26 boldsoft kernel: Found a Wildcard FXO: Wildcard X101P
> Jul 20 00:50:26 boldsoft kernel: ZapTel device loaded.
> Jul 20 00:50:33 boldsoft kernel: FXS device: vendor=e159 device=1
> subvendor=b100
> Jul 20 00:50:33 boldsoft kernel: wcfxs0: <Wildcard TDM400P REV E/F>
> port 0xec00-0xecff mem 0xfafff000-0xfaffffff irq 17 at dev
> ice 8.0 on pci2
> Jul 20 00:50:33 boldsoft kernel: FXS Attach for wcfxs0: deviceID :
> 0xe159
> Jul 20 00:50:33 boldsoft kernel: Freshmaker version: 63
> Jul 20 00:50:33 boldsoft kernel: Freshmaker passed register test
> Jul 20 00:50:35 boldsoft kernel: Module 0: Installed -- AUTO FXS
> Jul 20 00:50:35 boldsoft kernel: ProSLIC sanity check failed
> Jul 20 00:50:35 boldsoft kernel: Module 1: Not installed
> Jul 20 00:50:35 boldsoft kernel: ProSLIC sanity check failed
> Jul 20 00:50:35 boldsoft kernel: Module 2: Not installed
> Jul 20 00:50:35 boldsoft kernel: ProSLIC sanity check failed
> Jul 20 00:50:35 boldsoft kernel: Module 3: Not installed
> Jul 20 00:50:35 boldsoft kernel: Found a Wildcard TDM: Wildcard
> TDM400P
> REV E/F (4 modules)
> Jul 20 00:50:39 boldsoft kernel: Registered tone zone 0 (United States
> / North America)
> Jul 21 02:36:28 boldsoft kernel: DIAL: T345598w
> Jul 21 02:39:43 boldsoft kernel: DIAL: T345598w
> Jul 21 02:45:35 boldsoft kernel: DIAL: T345598w
> Jul 21 02:45:56 boldsoft kernel: DIAL: T99114909w
> Jul 21 02:47:09 boldsoft kernel: DIAL: T345598w
> Jul 21 02:47:56 boldsoft kernel: DIAL: T345595w
> Jul 21 02:48:16 boldsoft kernel: DIAL: T95158330w
> Jul 21 02:48:57 boldsoft kernel: DIAL: T95158330w
> Jul 21 02:49:20 boldsoft kernel: DIAL: T345598w
> Jul 21 02:49:43 boldsoft kernel: DIAL: T322473w
> Jul 21 02:50:02 boldsoft kernel: DIAL: T99114909w
> Jul 21 02:50:27 boldsoft kernel: DIAL: T99190040w
> Jul 21 02:50:48 boldsoft kernel: DIAL: T95158330w
> Jul 21 02:51:11 boldsoft kernel: DIAL: T91911187w
> Jul 21 02:54:01 boldsoft kernel: DIAL: T95158330w
> Jul 21 02:54:33 boldsoft kernel: DIAL: T345598w
> Jul 21 03:04:35 boldsoft kernel: DIAL: T345598w
> Jul 21 03:06:00 boldsoft kernel: DIAL: T99190040w
> Jul 21 03:06:24 boldsoft kernel: DIAL: T11345598w
> Jul 21 03:12:11 boldsoft kernel: DIAL: T1109w
> Jul 21 03:13:59 boldsoft kernel: DIAL: T18340w
> Jul 21 03:14:18 boldsoft kernel: DIAL: T18000w
> Jul 21 03:14:31 boldsoft kernel: DIAL: T18300w
> Jul 21 03:14:46 boldsoft kernel: DIAL: T345598w
> Jul 21 03:15:16 boldsoft kernel: DIAL: T99190040w
> Jul 21 03:15:46 boldsoft kernel: DIAL: T686000w
> Jul 21 03:16:09 boldsoft kernel: DIAL: T341341w
> Jul 21 03:16:39 boldsoft kernel: DIAL: T99114909w
> Jul 21 03:17:02 boldsoft kernel: DIAL: T345598w
> Jul 21 09:47:15 boldsoft kernel: DIAL: T345598w
>
> In Mongolia PSTN local number has 5-6 digits, Mobile number has 8
> digits and special enquiry service with 3-4 digits.
>
> I can to hear BUSY TONE after several seconds.
>
> 4.There another problem with Wildcard TDM400P REV E/F FXS port.
>
> After ~30mins I can't to hear DIALTONE on analog phone connected to
> FXS port.
>
> and I got following in /var/log/messages
> Jul 21 01:35:39 boldsoft kernel: Power alarm on module 1, resetting!
> Jul 21 09:57:06 boldsoft kernel: Freed a Wildcard
> Jul 21 09:57:06 boldsoft kernel: ZapTel detach!
> Jul 21 09:57:06 boldsoft kernel: wcfxo0: detached
> Jul 21 09:57:13 boldsoft kernel: FXS device: vendor=e159 device=1
> subvendor=8085
> Jul 21 09:57:13 boldsoft kernel: wcfxs1: <Wildcard TDM400P REV H> port
> 0xe800-0xe8ff mem 0xfaffe000-0xfaffefff irq 18 at devic
> e 9.0 on pci2
> Jul 21 09:57:13 boldsoft kernel: FXS Attach for wcfxs1: deviceID :
> 0xe159
> Jul 21 09:57:13 boldsoft kernel: Freshmaker version: 85
> Jul 21 09:57:13 boldsoft kernel: 00 != 85
> Jul 21 09:57:13 boldsoft kernel: 01 != 85
> Jul 21 09:57:13 boldsoft kernel: 02 != 85
> Jul 21 09:57:13 boldsoft kernel: 03 != 85
> Jul 21 09:57:13 boldsoft kernel: 04 != 85
> Jul 21 09:57:13 boldsoft kernel: 05 != 85
> Jul 21 09:57:13 boldsoft kernel: 06 != 85
> Jul 21 09:57:13 boldsoft kernel: 07 != 85
> Jul 21 09:57:13 boldsoft kernel: 08 != 85
> Jul 21 09:57:13 boldsoft kernel: 09 != 85
>
>  ReplyForward
>
>
> postmaster at telappliant.com
> This is an automatically generated Delivery Status Notification. Delivery 
> to ...
>   Aug 2 (21 hours ago)
>
> Mail Delivery System
> <MAILER-DAEMON at lists.digium.com> to me
> More options   Aug 2 (21 hours ago)
> This is the Postfix program at host lists.digium.com.
>
> I'm sorry to have to inform you that your message could not
> be delivered to one or more recipients. It's attached below.
>
> For further assistance, please send mail to <postmaster>
>
> If you do so, please include this problem report. You can
> delete your own text from the attached returned message.
>
>                       The Postfix program
>
> <asterisk-dev at lists.digium.com>: mail forwarding loop for
>   asterisk-dev at lists.digium.com
>
>
> Final-Recipient: rfc822; asterisk-dev at lists.digium.com
> Action: failed
> Status: 5.0.0
> Diagnostic-Code: X-Postfix; mail forwarding loop for
>   asterisk-dev at lists.digium.com
>
>
>
> ---------- Forwarded message ----------
> From: Ganbold Tsagaankhuu <ganbold at gmail.com>
> To: asterisk-users at lists.digium.com, asterisk-dev at lists.digium.com,
> asterisk-bsd at lists.digium.com
> Date: Tue, 2 Aug 2005 10:38:50 +0900
> Subject: [Asterisk-Dev] Questions on Asterisk and CallerID
> Hello,
>
> I have few questions about Asterisk.
> I installed Asterisk from CVS on FreeBSD and I made cvsup 2 days ago.
>
> 1.I couldn't find Asterisk version using "asterisk -V" command.
>
> How can I to find version information?
>
> 2.I am using Wildcard X101P (FXO) and Wildcard TDM400P REV E/F (FXS)on
> it.
>
> I tried Asterisk CallerID feature, but unable to get it.
> I tried callerid signaling V23, Bell202, DTMF, no success. Finally, I
> found in our country (Mongolia) PSTN/Cellular provider send FSK/ETSI
> type of CallerID.
>
> Is Asterisk support such type of CallerID signaling?
>
> If no, is there any way to get it?
>
> 3.I enjoyed Asterisk most of feature until now. I registered X-Pro
> softphone, SIP analog and analog phone connected to FXS port too.
>
> There one problem is I am unable to make outgoing call from SIP phone,
> softphone, analog phone through FXO port.
>
> Following is my Asterisk configuration:
> ------------------------------------------
> zaptel.conf
> loadzone=us
> defaultzone=us
> fxsks=1
> fxoks=2
>
>
> zapata.conf
> context=bell
> signaling=fxs_ks
> group=1
> channel => 1
>
>
> context=home
> group=2
> signalling=fxo_ks
> channel => 2
>
>
> sip.conf
> [88888888]
> type=friend
> username=88888888
> ;secret=1111
> host=dynamic
> nat=yes
> defaultip=192.168.1.5
> context=bell
> reinvite=no
> canreinvite=no
> callerid=88888888
> mailbox=88888888 at local
> allow=g729
> allow=g723
> allow=all
>
>
> [99999999]
> type=friend
> username=99999999
> ;secret=1111
> host=dynamic
> nat=yes
> defaultip=192.168.1.1
> context=bell
> reinvite=no
> canreinvite=no
> callerid=99999999
> mailbox=99999999 at local
> allow=g729
> allow=g723
>
>
> extensions.conf
> [bell]
> exten => s,1,Wait
> exten => s,2,Answer
> exten => s,3,Playback(greetings)
> exten => s,4,WaitExten
>
>
> ; used to record prompts
> exten => 205,1,Wait(2)
> exten => 205,2,Record(/tmp/greetings:alaw)
> exten => 205,3,Wait(2)
> exten => 205,4,Playback(/tmp/greetings)
> exten => 205,5,Wait(2)
> exten => 205,6,Hangup
>
>
> exten => 111,1,Dial(CONSOLE/dsp)
> exten => 111,2,Hangup
>
>
> exten => 100,1,Answer
> exten => 100,2,MusicOnHold()
> exten => 100,4,Hangup
>
>
> exten => 200,1,VoicemailMain
>
>
> exten => 300,1,Dial(Zap/2)
>
>
> exten => 400,1,Voicemail(99999)
>
>
> exten => 800,1,MeetMe(100|Mp)
> exten => 800,2,Hangup
>
>
> exten => 601,1,WaitMusicOnHold(30)
>
>
> exten => 700,1,Dial(SIP/88888888,20,rt)
> exten => 900,1,Dial(SIP/99999999,20,rt)
>
>
> exten => _ZXXX,1,Answer
> exten => _ZXXX,2,Dial(Zap/g1/${EXTEN})
> exten => _ZXXXX,1,Answer
> exten => _ZXXXX,2,Dial(Zap/g1/${EXTEN})
> exten => _NXXXXX,1,Answer
> exten => _NXXXXX,2,Dial(Zap/g1/${EXTEN})
> exten => _NXXXXXXX,1,Answer
> exten => _NXXXXXXX,2,Dial(Zap/g1/${EXTEN})
>
>
> [home]
> exten => s,1,Playback(greetings)
> exten => 100,1,Answer
> exten => 100,2,MusicOnHold()
> exten => 100,4,Hangup
>
>
> exten => 111,1,Dial(CONSOLE/dsp)
> exten => 111,4,Hangup
>
>
> exten => 700,1,Dial(SIP/88888888,20,rt)
> exten => 900,1,Dial(SIP/99999999,20,rt)
>
>
> exten => _ZXXX,1,Answer
> exten => _ZXXX,2,Dial(Zap/g1/${EXTEN})
> exten => _ZXXXX,1,Answer
> exten => _ZXXXX,2,Dial(Zap/g1/${EXTEN})
> exten => _NXXXXX,1,Answer
> ;exten => _NXXXXX,2,SetVar(TIMEOUT(AbsoluteTimeout)=10)
> exten => _NXXXXX,3,Dial(Zap/g1/${EXTEN})
> exten => _NXXXXXXX,1,Answer
> exten => _NXXXXXXX,2,Dial(Zap/g1/${EXTEN})
>
>
> I can to see following in /var/log/messages when I make outgoing call.
>
>
> Jul 20 00:50:26 boldsoft kernel: Zapata Telephony Interface Registered
> on major 196
> Jul 20 00:50:26 boldsoft kernel: ZapTel device: vendor=e159 device=1
> subvendor=8085
> Jul 20 00:50:26 boldsoft kernel: wcfxo0: <Wildcard X101P> port
> 0xe800-0xe8ff mem 0xfaffe000-0xfaffefff irq 18 at device 9.0 on
> pci2
> Jul 20 00:50:26 boldsoft kernel: ZapTel Attach for wcfxo0: deviceID :
> 0xe159
> Jul 20 00:50:26 boldsoft kernel: wcfxo: DAA mode is 'FCC'
> Jul 20 00:50:26 boldsoft kernel: Found a Wildcard FXO: Wildcard X101P
> Jul 20 00:50:26 boldsoft kernel: ZapTel device loaded.
> Jul 20 00:50:33 boldsoft kernel: FXS device: vendor=e159 device=1
> subvendor=b100
> Jul 20 00:50:33 boldsoft kernel: wcfxs0: <Wildcard TDM400P REV E/F>
> port 0xec00-0xecff mem 0xfafff000-0xfaffffff irq 17 at dev
> ice 8.0 on pci2
> Jul 20 00:50:33 boldsoft kernel: FXS Attach for wcfxs0: deviceID :
> 0xe159
> Jul 20 00:50:33 boldsoft kernel: Freshmaker version: 63
> Jul 20 00:50:33 boldsoft kernel: Freshmaker passed register test
> Jul 20 00:50:35 boldsoft kernel: Module 0: Installed -- AUTO FXS
> Jul 20 00:50:35 boldsoft kernel: ProSLIC sanity check failed
> Jul 20 00:50:35 boldsoft kernel: Module 1: Not installed
> Jul 20 00:50:35 boldsoft kernel: ProSLIC sanity check failed
> Jul 20 00:50:35 boldsoft kernel: Module 2: Not installed
> Jul 20 00:50:35 boldsoft kernel: ProSLIC sanity check failed
> Jul 20 00:50:35 boldsoft kernel: Module 3: Not installed
> Jul 20 00:50:35 boldsoft kernel: Found a Wildcard TDM: Wildcard
> TDM400P
> REV E/F (4 modules)
> Jul 20 00:50:39 boldsoft kernel: Registered tone zone 0 (United States
> / North America)
> Jul 21 02:36:28 boldsoft kernel: DIAL: T345598w
> Jul 21 02:39:43 boldsoft kernel: DIAL: T345598w
> Jul 21 02:45:35 boldsoft kernel: DIAL: T345598w
> Jul 21 02:45:56 boldsoft kernel: DIAL: T99114909w
> Jul 21 02:47:09 boldsoft kernel: DIAL: T345598w
> Jul 21 02:47:56 boldsoft kernel: DIAL: T345595w
> Jul 21 02:48:16 boldsoft kernel: DIAL: T95158330w
> Jul 21 02:48:57 boldsoft kernel: DIAL: T95158330w
> Jul 21 02:49:20 boldsoft kernel: DIAL: T345598w
> Jul 21 02:49:43 boldsoft kernel: DIAL: T322473w
> Jul 21 02:50:02 boldsoft kernel: DIAL: T99114909w
> Jul 21 02:50:27 boldsoft kernel: DIAL: T99190040w
> Jul 21 02:50:48 boldsoft kernel: DIAL: T95158330w
> Jul 21 02:51:11 boldsoft kernel: DIAL: T91911187w
> Jul 21 02:54:01 boldsoft kernel: DIAL: T95158330w
> Jul 21 02:54:33 boldsoft kernel: DIAL: T345598w
> Jul 21 03:04:35 boldsoft kernel: DIAL: T345598w
> Jul 21 03:06:00 boldsoft kernel: DIAL: T99190040w
> Jul 21 03:06:24 boldsoft kernel: DIAL: T11345598w
> Jul 21 03:12:11 boldsoft kernel: DIAL: T1109w
> Jul 21 03:13:59 boldsoft kernel: DIAL: T18340w
> Jul 21 03:14:18 boldsoft kernel: DIAL: T18000w
> Jul 21 03:14:31 boldsoft kernel: DIAL: T18300w
> Jul 21 03:14:46 boldsoft kernel: DIAL: T345598w
> Jul 21 03:15:16 boldsoft kernel: DIAL: T99190040w
> Jul 21 03:15:46 boldsoft kernel: DIAL: T686000w
> Jul 21 03:16:09 boldsoft kernel: DIAL: T341341w
> Jul 21 03:16:39 boldsoft kernel: DIAL: T99114909w
> Jul 21 03:17:02 boldsoft kernel: DIAL: T345598w
> Jul 21 09:47:15 boldsoft kernel: DIAL: T345598w
>
> In Mongolia PSTN local number has 5-6 digits, Mobile number has 8
> digits and special enquiry service with 3-4 digits.
>
> I can to hear BUSY TONE after several seconds.
>
> 4.There another problem with Wildcard TDM400P REV E/F FXS port.
>
> After ~30mins I can't to hear DIALTONE on analog phone connected to
> FXS port.
>
> and I got following in /var/log/messages
> Jul 21 01:35:39 boldsoft kernel: Power alarm on module 1, resetting!
> Jul 21 09:57:06 boldsoft kernel: Freed a Wildcard
> Jul 21 09:57:06 boldsoft kernel: ZapTel detach!
> Jul 21 09:57:06 boldsoft kernel: wcfxo0: detached
> Jul 21 09:57:13 boldsoft kernel: FXS device: vendor=e159 device=1
> subvendor=8085
> Jul 21 09:57:13 boldsoft kernel: wcfxs1: <Wildcard TDM400P REV H> port
> 0xe800-0xe8ff mem 0xfaffe000-0xfaffefff irq 18 at devic
> e 9.0 on pci2
> Jul 21 09:57:13 boldsoft kernel: FXS Attach for wcfxs1: deviceID :
> 0xe159
>Jul 21 09:57:13 boldsoft kernel: Freshmaker version: 85
> Jul 21 09:57:13 boldsoft kernel: 00 != 85
> Jul 21 09:57:13 boldsoft kernel: 01 != 85
> Jul 21 09:57:13 boldsoft kernel: 02 != 85
> Jul 21 09:57:13 boldsoft kernel: 03 != 85
> Jul 21 09:57:13 boldsoft kernel: 04 != 85
> Jul 21 09:57:13 boldsoft kernel: 05 != 85
> Jul 21 09:57:13 boldsoft kernel: 06 != 85
> Jul 21 09:57:13 boldsoft kernel: 07 != 85
> Jul 21 09:57:13 boldsoft kernel: 08 != 85
> Jul 21 09:57:13 boldsoft kernel: 09 != 85
> _______________________________________________
> Asterisk-BSD mailing list
> Asterisk-BSD at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-bsd
>

More information about the Asterisk-BSD mailing list