[Asterisk-bsd] Zaptel & Wildcard TDM400P

[Arnaud]

Hello,

I try to test zaptel with FreeBSD but i have a problem with loading 
zaptel driver on my Wildcard TDM400P.

Seems FXS can't be correctly be detected. (FreeBSD 5 current)
2 FXS & 2 FXO module on board.
Same card work fine with Debian

Apr 28 03:46:15 freebsd kernel: Zapata Telephony Interface Registered on 
major 196
Apr 28 03:46:15 freebsd kernel: FXS device: vendor=e159 device=1 
subvendor=b100
Apr 28 03:46:15 freebsd kernel: wcfxs0: <Wildcard TDM400P REV E/F> port 
0x9000-0x90ff mem 0xdf008000-0xdf008fff irq 17 at device 9.0 on pci1
Apr 28 03:46:15 freebsd kernel: FXS Attach for wcfxs0: deviceID : 0xe159
Apr 28 03:46:15 freebsd kernel: Freshmaker version: 71
Apr 28 03:46:15 freebsd kernel: Freshmaker passed register test
Apr 28 03:46:15 freebsd kernel: ProSLIC on module 0 failed to powerup 
within 501 ms (0 mV only)
Apr 28 03:46:15 freebsd kernel: Unable to do INITIAL ProSLIC powerup on 
module 0
Apr 28 03:46:15 freebsd kernel: ProSLIC on module 0 failed to powerup 
within 501 ms (0 mV only)
Apr 28 03:46:15 freebsd kernel: Unable to do INITIAL ProSLIC powerup on 
module 0
Apr 28 03:46:15 freebsd kernel: Module 0: FAILED FXS
[snip same for second port]
Apr 28 03:46:15 freebsd kernel: Module 2: Installed -- AUTO FXO
Apr 28 03:46:15 freebsd kernel: Module 3: Installed -- AUTO FXO
Apr 28 03:46:15 freebsd kernel: Found a Wildcard TDM: Wildcard TDM400P 
REV E/F (4 modules)

Thanks for help