[Asterisk-bsd] H323 channel driver is not capable to make outgoing calls

[Konstantin Prokazoff]

Welcome everybody.

Check here - pwlib/make/ptbuildopts.h.
We have stable version of H323 based on code by Mark and Jer.

Best regards, Konstantin Prokazoff
Center Of Excellce, SVR Ltd., Kyiv HQs, Ukraine
Official business-partner & DevConnect member of Avaya, Inc.
tel. +38 044 244 11 81, fax. +38 044 234 04 55

----- Original Message -----
From: "Kirk Davis" <Kirk.Davis at epsb.ca>
To: "'Asterisk on BSD discussion'" <asterisk-bsd at lists.digium.com>
Sent: Thursday, April 21, 2005 1:25 AM
Subject: RE: Re[2]: [Asterisk-bsd] H323 channel driver is not capable to
make outgoing calls


> Thanks for the feedback Konstantin.
>
> Unless I'm missing something, there is a check in pwlib/make/lib.mak for
> FreeBSD and NetBSD around line 180 for pthread and it seems to set it
> correctly.
>
> Have you seen and recent changes to fix the leakage in chan_h323.c?  I
have
> seen some recent channel patches but haven't yet had a chance to look them
> over and see if they should be applied.
>
> ----- Kirk
>
> -----Original Message-----
> From: asterisk-bsd-bounces at lists.digium.com
> [mailto:asterisk-bsd-bounces at lists.digium.com] On Behalf Of Konstantin
> Prokazoff
> Sent: April 19, 2005 1:03 AM
> To: Dmitriy Belonozhkin; Asterisk on BSD discussion
> Subject: Re: Re[2]: [Asterisk-bsd] H323 channel driver is not capable to
> make outgoing calls
> Importance: High
>
> Welcome!
>
>     Thereof we have using PWLib 1.9.1 & OpenH323 1.17.2. All compiles
fine,
> but there are many errors/bugs/memory leakage in code of chan_h323.c, -
for
> beginning erroneous handling of channel(s) start, cause channel driver
runs
> RTP when H323 stack signalling haven't finished. And as addition, I
suggest
> to change in pwlib/make/ptbuildopts.mak, ENDLDLIBS += -lpthread ...
> to -pthread for 5.3 or higher FBSD.
>
> Best regards, Konstantin Prokazoff
> Center Of Excellence, SVR Ltd., Kyiv HQs, Ukraine
> Official business-partner & DevConnect member of Avaya, Inc.
> tel. +38 044 244 11 81, fax. +38 044 234 04 55
>
> ----- Original Message -----
> From: "Dmitriy Belonozhkin" <dan at tdata.ru>
> To: "Kirk Davis" <Kirk.Davis at epsb.ca>
> Cc: "'Asterisk on BSD discussion'" <asterisk-bsd at lists.digium.com>
> Sent: Tuesday, April 19, 2005 9:38 AM
> Subject: Re[2]: [Asterisk-bsd] H323 channel driver is not capable to make
> outgoing calls
>
>
> > Hello Kirk,
> >
> > Monday, April 18, 2005, 9:03:13 PM, you wrote:
> >
> > KD> I have ported the new OpenH323 and PWLib over to FreeBSD and
> > KD> created the ports for them. I'm still testing (I only finished
> > KD> them on Friday) so you are welcome to give them a try and see how
> > KD> it works for you.
> >
> > Well your ports have been compiled under FreeBSD v5.4-STABLE without
> > any problems.
> >
> > KD> I have not yet tried them with Asterisk
> >
> > But it is not possible to build asterisk-1.0.7 with your ports. There
> > is huge number of errors when it starts to compile the H323 channel
> > driver. It seems that the problem is the same i.e. a version mismatch
> > :-(
> >
> > *[skipped]*
> >
> > ---
> > Best regards,
> >  Dmitriy Belonozhkin
> >  TeleDATA Engineering LLC (Orel, Russia)
> >  Phone: +7-086-2-499931 (ext. 206)
> >  mailto:dan at tdata.ru
> >  http://www.tdata.ru/
> >
> >
> > _______________________________________________
> > Asterisk-BSD mailing list
> > Asterisk-BSD at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-bsd
> >
>
> _______________________________________________
> Asterisk-BSD mailing list
> Asterisk-BSD at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-bsd
> _______________________________________________
> Asterisk-BSD mailing list
> Asterisk-BSD at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-bsd
>