[Asterisk-bsd] Re: Asterisk 1.0.6, zaptel for NetBSD in pkgsrc-wip

[Jeff Rizzo]

Wow, I guess I hadn't tried using the timing device under -current
recently!  I found the problem, though - NetBSD 2.99.16 and later use
EMOVEFD instead of ENXIO as the 'special in-kernel return code' for
moving a descriptor while cloning...  I'd changed the fdclone() call,
but none of the other bits in zaptel.c.  This is now fixed.  :-)

Please download the latest (zaptel-netbsd-20050404.tar.bz2) and try again.

Thanks for the feedback!

+j


Tom Ivar Helbekkmo wrote:

>Jeff Rizzo <riz+asterisk at boogers.sf.ca.us> writes:
>
>  
>
>>The NetBSD zaptel drivers currently support wcfxo, wcfxs and ztdummy
>>on NetBSD 2.0 and up.  They are available separately at
>>http://www.tastylime.net/netbsd/zaptel/
>>    
>>
>
>I've tried to get this working on my machines, currently running
>NetBSD 3.99.1, but with no luck:
>
>dejah# /sbin/modload -s -p /usr/local/sbin/zaptel_postinstall /usr/local/lkm/mod_zaptel.o
>Module loaded as ID 0
>dejah# /sbin/modload -s /usr/local/lkm/mod_ztdummy.o
>Module loaded as ID 1
>dejah# cat /usr/local/etc/zaptel.conf
>loadzone=no
>defaultzone=no
>dejah# /usr/local/bin/ztcfg
>Keyword: [loadzone], Value: [no]
>Keyword: [defaultzone], Value: [no]
>dejah# dmesg
>[...]
>Zapata Telephony Interface Registered on major 196
>Registered Span 1 ('ZTDUMMY/1') with 0 channels
>Span ('ZTDUMMY/1') is new master
>ztdummy: init() finished
>ztdummy: loaded
>Registered tone zone 8 (Norway)
>dejah# ls -l /dev/zap
>total 0
>crw-r--r--  1 root  wheel  - 196, 254 Apr  4 09:12 channel
>crw-r--r--  1 root  wheel  - 196,   0 Apr  4 09:12 ctl
>crw-r--r--  1 root  wheel  - 196, 255 Apr  4 09:12 pseudo
>crw-r--r--  1 root  wheel  - 196, 253 Apr  4 09:12 timer
>dejah# zttest 
>Unable to open zap interface: Device not configured
>dejah# 
>
>Am I doing it wrong?  Or do you have any ideas for how I can figure
>out why it isn't working for me?
>
>-tih
>  
>