[Asterisk-bsd] Problem with TDM400P

[Tariuc]

Hello Dinesh,


Power cable is attached, (power cable same as for IDE, right?)

I've attached phone line to the one slot.
Should be indicator light on (switched on) ? Because for now no one
indicator is lightning.


voip# pciconf -l
hostb0 at pci0:0:0:        class=0x060000 card=0x11308086 chip=0x11308086 rev=0x02 hdr=0x00
agp0 at pci0:2:0:  class=0x030000 card=0x11328086 chip=0x11328086 rev=0x02 hdr=0x00
pcib1 at pci0:30:0:        class=0x060400 card=0x00000000 chip=0x24188086 rev=0x02 hdr=0x01
isab0 at pci0:31:0:        class=0x060100 card=0x00000000 chip=0x24108086 rev=0x02 hdr=0x00
atapci0 at pci0:31:1:      class=0x010180 card=0x24118086 chip=0x24118086 rev=0x02 hdr=0x00
uhci0 at pci0:31:2:        class=0x0c0300 card=0x24128086 chip=0x24128086 rev=0x02 hdr=0x00
none0 at pci0:31:3:        class=0x0c0500 card=0x24138086 chip=0x24138086 rev=0x02 hdr=0x00
none1 at pci0:31:5:        class=0x040100 card=0x4326414c chip=0x24158086 rev=0x02 hdr=0x00
vr0 at pci1:0:0:   class=0x020000 card=0x14031186 chip=0x31061106 rev=0x86 hdr=0x00
wcfxs0 at pci1:2:0:        class=0x078000 card=0x0003b100 chip=0x0001e159 rev=0x00 hdr=0x00


Thanks in advance.


Monday, November 15, 2004, 7:36:44 PM, you wrote:

DN> On 15/11/2004 22:24 Tariuc said the following:
>> Hello asterisk-dev,
>> 
>>   I've got recently TDM400P
>>   TDM04B: TDM400P + 4 PORT FXO Bundle
>> Module 0: Not installed
>> Module 1: Not installed
>> Module 2: Not installed
>> Module 3: Not installed

DN> have you attached the power cable to the card ? also, what does pciconf -l
DN> show ?

DN> i've noticed that the latest version of the wctdm driver (still wcfxs in
DN> freebsd) has a few new PCI device ids supported. your card may be one of
DN> the new ones.




-- 
Best regards,
 Tariuc                            mailto:oxen at oxena.net