[Asterisk-bsd] Red alarm on wildcard

[Keith Pitcher]

5.2-current system as of the 26th

Using zaptel 0.6 from ports, and asterisk .9 from ports, 
zttool shows a red alarm for the wildcard, I assume this will make asterisk
not answer any calls?

The card is on its own IRQ, and I've tried bouncing it to other PCI slots,
but it still has a red alarm. A pass through POTS phone will get dialtone,
and the card did come from a working mandrake system.

WARNING: driver "zaptel" used unreserved major device number 196
Zapata Telephony Interface Registered on major 196
ZapTel device: vendor=e159 device=1 subvendor=8085
wcfxo0: <Wildcard X101P> port 0x1000-0x10ff mem 0xe8080000-0xe8080fff irq 10
at device 14.0 on pci0
ZapTel Attach for wcfxo0: deviceID : 0xe159
wcfxo0: [GIANT-LOCKED]
wcfxo: DAA mode is 'FCC'
Found a Wildcard FXO: Wildcard X101P
ZapTel device loaded.
Registered tone zone 0 (United States / North America)

Any suggestions?

Keith