[asterisk-biz] Starting a VOIP Business

[Mike Hammett]

Mikrotik's N-Streme 2 must be based on what you state, but breaks wifi and 
is PtP only.


----------
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com


----- Original Message ----- 
From: "Trixter aka Bret McDanel" <trixter at 0xdecafbad.com>
To: "Commercial and Business-Oriented Asterisk Discussion" 
<asterisk-biz at lists.digium.com>
Sent: Friday, February 01, 2008 8:47 AM
Subject: Re: [asterisk-biz] Starting a VOIP Business


>
> On Fri, 2008-02-01 at 14:33 +0000, Andy Davidson wrote:
>> On 31 Jan 2008, at 16:54, Mike Hammett wrote:
>>
>> > As a WISP and VoIP operator myself I agree that those things cause
>> > issues,
>> > but not all WISPs are operated in that fashion.  What percentage, I
>> > cannot
>> > say, but my network has less than 0.1% packet loss and end-end
>> > latency is
>> > almost always less than 10 ms, but usually less than 5 ms.
>>
>> So how did you solve the duplexity issues of Wireless, and what they
>> does to high-demand voip ?
>
>
> there was a group a couple years ago that did linux drivers specifically
> to resolve this.  Basically they have 2 cards one is always Tx one is
> always Rx, and they can do full duplex that way.  The goal was with
> 802.11 (wifi) specifically and for a mesh layout specifically (although
> it could be used with a single node).
>
> 802.16 (wimax) supports both TDD (half duplex) and FDD (full duplex), so
> depending on what you are doing specifically you may not have to do
> anything sneaky like the aforementioned linux drivers.
> -- 
> Trixter http://www.0xdecafbad.com     Bret McDanel
> Belfast +44 28 9099 6461        US +1 516 687 5200
> http://www.trxtel.com the phone company that pays you!
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-biz mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-biz
>