[Asterisk-biz] Fritz!Card PnP installation on FC3

[Si Tai Fan]

The HiPath 3550 will need a HG1500 or a HXGS card to do H323 and it cost 
an arm and a leg. The resons I am going this direction is that the BRI 
are already included as default when you buy the system. Why pay extra 
when you have it already?

Ted Gibson wrote:

>Just interface using VoIP teh 3550 suports H323
>
>-----Original Message-----
>From: asterisk-biz-bounces at lists.digium.com
>[mailto:asterisk-biz-bounces at lists.digium.com]On Behalf Of Si Tai Fan
>Sent: Friday, October 28, 2005 4:56 PM
>To: Commercial and Business-Oriented Asterisk Discussion
>Subject: [Asterisk-biz] Fritz!Card PnP installation on FC3
>
>
>Hi
>
>Is there anyone out there have installed this card on Fedora Core 3 and 
>asterisk sucessfully? I like to install it and interface it to an 
>exisiting  Siemens HiPath 3550 PABX which comes with 2 BRI channels on 
>the CPU motherboard. I think this will be best solution to interface the 
>system with Asterisk compared to using a ATA FXS or FXO solutions.
>
>Stephen
>
>
>_______________________________________________
>Asterisk-Biz mailing list
>Asterisk-Biz at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-biz
>
>
>
>  
>