[Asterisk-biz] need consultant

[Jonathan k. Creasy]

Is your provider using md5. Send your iax2 debug output. 

I had that problem once and it was something related to that, can't
remember exactly what it was. Do you get "No Authority Found" in your
iax2 debug output?

-----Original Message-----
From: asterisk-biz-bounces at lists.digium.com
[mailto:asterisk-biz-bounces at lists.digium.com] On Behalf Of chawki
hammoud
Sent: Thursday, October 27, 2005 4:55 PM
To: Asterisk-Biz at lists.digium.com
Subject: [Asterisk-biz] need consultant

Hi:

I am using a voip provider that has both sip and iax
in their system. I can make calls using sip with no
problems. But I can't make calls through the same voip
provider using IAX. I get the following  message while
the call is in progress:

  dial xxxxxxxxxxxx at calls
    -- Executing Dial("OSS/dsp",
"IAX2/voipprovider/xxxxxxxxxxxx") in new stack
    -- Called voipprovider/xxxxxxxxxxxx
    -- Call accepted by 213.61.187.150 (format g729)
    -- Format for call is g729
    -- Hungup 'IAX2/voipprovider/3'
  == No one is available to answer at this time


This is my iax voipprovider configuration:

[voipprovider]
type=peer
host=213.61.187.150
username=xxxxxxxxx
secret=xxxxxxxxxx

and i have another problem that concerns hangup .








		
__________________________________ 
Start your day with Yahoo! - Make it your home page! 
http://www.yahoo.com/r/hs
_______________________________________________
Asterisk-Biz mailing list
Asterisk-Biz at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-biz