[Asterisk-biz] Asterisk integration with 2N Easy Gate Analog GSMGateway

[Linus Surguy]

Hi Melisa,

We've havnt used these devices, so can't help specifically, however you do 
need to make sure that you have sufficent distance between the various bits 
of equipment - do not site the antenna, gateway and ATA close together. If 
possible site all three items 3-4 yards/metres apart from each other 
minimum.

Linus

----- Original Message ----- 
From: "Melisa Teoh" <melisa.teoh at gmail.com>
To: "Commercial and Business-Oriented Asterisk Discussion" 
<asterisk-biz at lists.digium.com>
Sent: Tuesday, November 08, 2005 2:49 AM
Subject: [Asterisk-biz] Asterisk integration with 2N Easy Gate Analog 
GSMGateway


> Has anyone on the list integrated this 2N mobile gateway with Asterisk 
> successfully?
>
> We have tested it under two scenarios - connected directly to a Zap 
> channel on a digium card and via an ATA w/ PSTN gateway port.
>
> In both cases, we are experiencing poor call quality with a high degree of 
> static interference, apparently from the GSM radio.  Similar to what you 
> hear if you are in the middle of a conversation on a traditional desktop 
> phone with your mobile sitting near by and an incoming call comes in on 
> the mobile.
>
> Any advice on how this issue might be resolved would be greatly 
> appreciated.
>
> Thank you.
>
> Melisa.
>
> P/S: We have also written to 2N and contacted their distributor but have 
> yet to receive a response.
> _______________________________________________
> Asterisk-Biz mailing list
> Asterisk-Biz at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-biz
>