[Asterisk-biz] asterisk server colocation

[Steve Totaro]

alex wrote:

>As far as "connections directly to carriers", how do you do that?
>Straight resale? How do you bill for these "direct" connections?

MCI and Qwest are on our floor at 2323 Bryan, so it's not difficult at
all 
to get a fiber handoff from them.  We also have fiber to 2323 Bryan's 
meet-me room where customers can meet up with any of the other carriers
on 
any other floor.  2323 Bryan is a fiber-only building, they [Capstar,
the 
building management] don't allow copper in the conduits so copper muxing
has 
to be done in the meet-me room or in our suite with an extended demarc.

1950 Stemmons is easier for [copper] cross connects, it is the second
most 
connected building in Dallas after 2323 bryan.  We are literally 10 feet

from the building meet-me room on the 1st floor, so we can do copper
cross 
connects as well as fiber.  I have all my copper come in to this
location 
since it's cleaner than trying to mux across 2323 bryan.

So to answer your question, depending on what the customer wanted
[copper or 
fiber] they could just buy a zero-loop port from the carrier and deal
with 
the carrier direct.  We also offer resold TDM loops, usually with better
per 
minute pricing than going to to Qwest/MCI/etc direct since we have a
large 
monthly commit and a smaller carrier may not.

Getting CLEC access can actually be more valuable since the rates are
much 
better, but obviously not even the mega-CLECs like XO can offer the
coverage 
areas that the big IXC guys like Qwest/MCI/etc can.

>For comparison, we also have presence in carrier facilities (60 Hudson,
>9th floor-TelX and 13th/XO, 111 8th Avenue -room 1515/NYCX, 25
>Broadway/Telehouse) as well as operating our own facility at 55 Broad
St

Those are very nice facilities.

Yours,
Matthew
TxLink Communications
www.txlink.net/


It sounds like you guys have some very nice setups indeed.

Thanks,
Steve